MAUDE Adverse Event Report: MEDTRONIC, INC EVEREST INFLATION DEVICE 30ATM; ADAPTOR, STOPCOCK, MANIFOLD, FITTING, CARDIOPULMONARY BYPASS

Catalog Number AC3200

Device Problems Display or Visual Feedback Problem (1184); Defective Device (2588)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Type  malfunction  

Manufacturer Narrative

If information is provided in the future, a supplemental report will be issued.

Event Description

It was reported that everest devices do not maintain pressures when deploying stents and balloons.A pressure greater than 12atm was applied to the everest devices.It is uncertain if the needle returned to zero during deflation.It was also reported that there were times where the everest would not hold negative pressure when prepping a balloon.It was stated that the make of stents and balloons used were not known exactly as various were used.A stopcock was connected between the everest and the other devices.No patient injury reported.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: EVEREST INFLATION DEVICE 30ATM
• Type of Device: ADAPTOR, STOPCOCK, MANIFOLD, FITTING, CARDIOPULMONARY BYPASS
• Manufacturer (Section D): MEDTRONIC, INC; 37a cherry hill dr; danvers MA 01923
• Manufacturer (Section G): MEDTRONIC, INC; 37a cherry hill dr; danvers MA 01923
• Manufacturer Contact: alison sweeney ; parkmore business park west; galway ; EI ; 091708096
• MDR Report Key: 14494622
• MDR Text Key: 292575446
• Report Number: 1220452-2022-00038
• Device Sequence Number: 1
• Product Code: DTL
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K153038
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 07/13/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 05/25/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: AC3200
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 07/06/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1