Catalog Number AASLE06100 |
Device Problems
Loss of or Failure to Bond (1068); Break (1069); Positioning Failure (1158)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 06/10/2022 |
Event Type
malfunction
|
Event Description
|
It was reported that during a stent graft placement procedure, the pulley of the stent allegedly broke.It was further reported that the stent allegedly failed to deploy.There was no reported patient injury.
|
|
Manufacturer Narrative
|
The catalog number identified has not been cleared in the us but is similar to the covera vascular covered stent products that are cleared in the us.The pro code and 510 k number for the covera vascular covered stent products are identified.As the lot number for the device was provided, a review of the device history records is currently being performed.The return of the sample is pending.However, a video was provided for review.The investigation of the reported event is currently underway.(expiry date: 11/2022).Device pending return.
|
|
Event Description
|
It was reported that during a stent graft placement procedure via common femoral puncture through contralateral approach, the pulley of the stent allegedly broke.It was further reported that the stent allegedly failed to deploy.There was no reported patient injury.
|
|
Manufacturer Narrative
|
H10: the catalog number identified in section d4 has not been cleared in the us but is similar to the covera vascular covered stent products that are cleared in the us.The pro code and 510 k number for the covera vascular covered stent products are identified in d2 and g4.H10: manufacturing review: the lot history records of this lot were reviewed with special attention to the manufacturing and inspection of this product and the product was found to have met the specification prior to shipment.Investigation summary: the stent delivery system was received for evaluation.The safety lock was found in unlocked position and the grip shells of the delivery system were found disassembled.The stent was found in system and in place.The slide block was found disconnected from the proximal sheath, which is considered being the cause for the reported problems to deploy the covered stent using the deployment wheel.In addition, a short video file was provided with a sequence of an angiography, which is presumably the intended placement site of the sfa with a critical restenosis.The tracking anatomy was reported being reasonably difficult.Device compatible accessories were used.Based on evaluation of the sample the inability of an adhesive joint (slide block/tether/diving sheath) to withstand tension force during deployment is confirmed.A definite root cause could not be determined based upon available information.Labeling review: in reviewing the relevant labeling for this product, the potential issue was found addressed.Based on the instructions for use supplied with this product delivery system specific events that could be associated with clinical complications include but are not limited to failure to deploy and high deployment forces.Regarding correct deployment the instructions for use states: "(.) maintain a stationary hold on the white stability sheath during covered stent deployment (¿).Hold the white stability sheath as close as possible to the introducer without touching the dark brown moving catheter of the distal catheter assembly.Maintain the remainder of the white stability sheath (.) relaxed and avoid tension." regarding preparation the instructions for use states: "pre-dilate the stenosis with a pta balloon catheter of appropriate length and diameter for the lesion to be treated." h10: (expiry date:11/2022).H11: section a through f - the information provided by bd represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.
|
|
Search Alerts/Recalls
|