• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: ZIMMER BIOMET SPINE INC. POLYAXIAL SCREW (DIA. 3.5 MM X 14 MM L); VIRAGE OCT SPINAL FIXATION SYSTEM

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

ZIMMER BIOMET SPINE INC. POLYAXIAL SCREW (DIA. 3.5 MM X 14 MM L); VIRAGE OCT SPINAL FIXATION SYSTEM Back to Search Results
Catalog Number 07.01702.007
Device Problem Crack (1135)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 08/12/2022
Event Type  malfunction  
Manufacturer Narrative
Without a product return, no product evaluation is able to be conducted.Current information is insufficient to permit a valid conclusion about the cause of this event.If additional information is obtained that adds value to the relevant content of this report and/or a conclusion can be drawn, a follow-up report will be sent.Reference reports 3012447612-2022-00220 through 3012447612-2022-00224.
 
Event Description
It was reported that two virage screws broke at the weld and three others cracked at the weld intra-operatively.On one screw, the surgeon pushed on it from above after the closure top was tightened and the lower housing broke into two pieces at the welds.Then the surgeon noticed the other four screws that either broke or cracked.All of the screws were removed and replaced to complete the procedure.There were no reported patient impacts.This is report three of five for this event.
 
Manufacturer Narrative
Device evaluation: there were no cracks found on the welds from the pieces from lots abe and abx.Root cause: a definitive root cause cannot be determined with the information provided.This event could possibly be attributed to excess force applied while torqueing the set screws.Dhr review: per dhr review, the part was likely conforming when it left zimvie control.Device usage: this device is used for treatment.If additional information is obtained that adds value to the relevant content of this report, a follow-up report will be sent.
 
Event Description
It was reported that two virage screws broke at the weld and three others cracked at the weld intra-operatively.On one screw, the surgeon pushed on it from above after the closure top was tightened and the lower housing broke into two pieces at the welds.Then the surgeon noticed the other four screws that either broke or cracked.All of the screws were removed and replaced to complete the procedure.There were no reported patient impacts.This is report three of five for this event.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
POLYAXIAL SCREW (DIA. 3.5 MM X 14 MM L)
Type of Device
VIRAGE OCT SPINAL FIXATION SYSTEM
Manufacturer (Section D)
ZIMMER BIOMET SPINE INC.
10225 westmoor dr.
westminster CO 80021
Manufacturer (Section G)
ZIMMER BIOMET SPINE INC.
10225 westmoor dr.
na
westminster CO 80021
Manufacturer Contact
kim martinez
10225 westmoor dr.
na
westminster, CO 80021
3035144809
MDR Report Key15566469
MDR Text Key305791215
Report Number3012447612-2022-00222
Device Sequence Number1
Product Code KWP
UDI-Device Identifier00889024327009
UDI-Public(01)00889024327009(10)ABX
Combination Product (y/n)N
Reporter Country CodeJA
PMA/PMN Number
K133556
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,Health Professional,Company Representative
Reporter Occupation Physician
Type of Report Initial,Followup
Report Date 02/15/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received10/07/2022
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Catalogue Number07.01702.007
Device Lot NumberABX
Was Device Available for Evaluation? Device Returned to Manufacturer
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Date Manufacturer Received02/09/2023
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured08/18/2021
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-