Related manufacturing ref: 3008452825-2022-00664.During the atrial fibrillation ablation procedure, there was a communication issue with 2 tactiflex catheters resulting in delay of procedure.When using the ensite x in voxel mode, after the puncture, the left atrium was approached with the ablation catheter and the ring, and map was obtained under cs pace.After that, when it was attempted to execute eepvi, the temperature control was applied from the first point, and the output became 18 watts on average.The issue was with the temperature sensor abnormality.After that, there was also an issue with the arrow, so the system reference patch and catheter were exchanged but the issue did not resolve.When flushed and inserted into the body, the catheter was displayed on the ensite x, but it was not recognized on the ampere generator, and the message "no catheter is connected" continued to display.The ampere generator and the tactisys were power cycled and exchanged, the cable between tactisys-ampere generator was exchanged, the ensite x was power cycled, the system reference was exchanged, but the ampere generator still did not recognize the catheter.The catheter was exchanged again and the issue resolved.The procedure was completed with no adverse consequences to the patient.
|
One bi-directional, curve d-f, tactiflex ablation catheter, sensor enabled was received for evaluation.When the returned device was connected to the tactisys quartz unit, optical fibers 1-3 met specifications for optical properties and contact force was displayed with no error messages noted.Electrode 1, both thermocouples and the magnetic sensor met specifications during electrical testing with no open or short circuits detected and the 10-pin connector eeprom met programming specifications.In addition, when connected to an ampere generator the device was recognized with no error messages or anomalies noted.The device history record was reviewed to ensure that each manufacturing and inspection operation was performed.The cause of the reported event remains unknown.
|