MAUDE Adverse Event Report: MEDTRONIC MEXICO S. DE R.L. DE CV BROCKENBROUGH¿ NEEDLE; TROCAR

Model Number EP003994S

Device Problem Break (1069)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 11/10/2022

Event Type  malfunction  

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

It was reported that during a cryo ablation procedure, compatibility issues were noted between the transseptal needle and another manufacturers sheath.During preparation, when advancing the needle through the sheath, a piece of plastic was expelled from the sheath when injecting saline through the system.The sheath was replaced twice without resolving the issue.Subsequently, the needle was replaced which resolved the issue.The case was completed with cryo.No patient complications have been reported, as a result of this event.

Manufacturer Narrative

Product event summary: a photo was returned and analyzed.The photo was not clear, but showed two plastic pieces, suspected to be from the sheath.In conclusion, the reported skiving could not be confirmed through analysis of the photo.The physical product has not yet been returned.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Product event summary: two transseptal needles were returned and analyzed.Both needles were received in the same package and since they are the same model, it cannot be determined which one had the reported issues.No visible blood was found on either needle.Upon evaluation of the returned needles, it was found that there was no kink, no bend or other visible defects.Both needles pass the visual inspection and showed that it was intact with no apparent issues.In conclusion, the reported skiving could not be confirmed through testing.The needle did not fail the returned product inspection.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: BROCKENBROUGH¿ NEEDLE
• Type of Device: TROCAR
• Manufacturer (Section D): MEDTRONIC MEXICO S. DE R.L. DE CV; av. paseo del cucapah #10510; tijuana,bc 22210 ; MX 22210
• Manufacturer (Section G): MEDTRONIC MEXICO S. DE R.L. DE CV; av. paseo del cucapah #10510; tijuana,bc 22210 ; MX 22210
• Manufacturer Contact: paula bixby ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635055378
• MDR Report Key: 15829665
• MDR Text Key: 307324196
• Report Number: 9617601-2022-00164
• Device Sequence Number: 1
• Product Code: DRC
• UDI-Device Identifier: 00613994663146
• UDI-Public: 00613994663146
• Combination Product (y/n): N
• Reporter Country Code: SP
• PMA/PMN Number: PRE-AMEND
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup
• Report Date: 04/23/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 11/19/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 01/31/2024
• Device Model Number: EP003994S
• Device Catalogue Number: EP003994S
• Device Lot Number: 223715262
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 03/27/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 01/31/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1