• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: BRAEMAR MANUFACTURING, LLC UNIT, C6M, A10E U

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

BRAEMAR MANUFACTURING, LLC UNIT, C6M, A10E U Back to Search Results
Model Number 02-01804
Device Problems Thermal Decomposition of Device (1071); Electrical /Electronic Property Problem (1198); Temperature Problem (3022); Excessive Heating (4030)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 11/18/2022
Event Type  malfunction  
Event Description
Biotel heart customer support notified braemar that a patient had an event monitor placed earlier this month, which encountered an electrical issue that did not result in patient or family harm.The family noticed a burning smell in the middle of the night and identified that it was the event monitor cell phone which was charging.They were able to unplug the device before further damage occurred.
 
Manufacturer Narrative
Device is being returned for evaluation by manufacturing/supplier.A follow up report will be sent when investigation has been completed.
 
Manufacturer Narrative
Engineering evaluation was completed.Device was inspected for general physical integrity.The charging cord was melted and stuck into the monitor and there was melting along near the charging port on the monitor.The charging cable was removed from the monitor and inspected.The circuits leading up to the usb-c connection components were melted.The connection component was mostly ok with melted plastic still covering the metal connector.Monitor was inspected; the outside case was melted and the contacts within the port were melted.Monitors circuit board was inspected and the circuit board showed no signs of damage.Conclusion: engineering evaluation was able to confirm the device melt, although the source of the melt was most probable to be the charging cord.There were minimal signs of damage to the monitor itself suggesting that it was functioning as intended.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
UNIT, C6M, A10E U
Type of Device
UNIT, C6M, A10E U
Manufacturer (Section D)
BRAEMAR MANUFACTURING, LLC
1285 corporate center drive
suite 150
eagan MN 55121
Manufacturer (Section G)
BRAEMAR MANUFACTURING, LLC
1285 corporate center dr
suite 150
eagan MN 56121
Manufacturer Contact
beverly okoh
1285 corporate center drive
suite 150
eagan, MN 55121
6124263781
MDR Report Key15860836
MDR Text Key304273864
Report Number2133409-2022-00015
Device Sequence Number1
Product Code DSI
UDI-Device IdentifierB146C6M70
UDI-PublicB146C6M70
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K171410
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Consumer,Health Professional,Company Representative,Distributor
Reporter Occupation Nurse Practitioner
Type of Report Initial,Followup
Report Date 11/18/2022
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received11/24/2022
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Lay User/Patient
Device Model Number02-01804
Was Device Available for Evaluation? No
Date Manufacturer Received11/18/2022
Was Device Evaluated by Manufacturer? Yes
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-