MAUDE Adverse Event Report: DEPUY SYNTHES PRODUCTS LLC EMAX 2 PLUS MOTOR; MOTOR, SURGICAL INSTRUMENT, AC-POWERED

Model Number EMAX2PLUS

Device Problems Environmental Particulates (2930); Excessive Heating (4030)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/01/2023

Event Type  malfunction  

Event Description

It was reported from japan that the motor device generated heat, produced smoke and emitted a bad smell.It was not reported if the device was used in surgery, or if there was patient involvement.It was not reported if there were any delays in a surgical procedure or if a spare device was available.There were no reports of injuries, medical intervention or prolonged hospitalization.The exact date of the event was unknown.However, it was reported that the event occurred in 2023.All available information has been disclosed.If additional information should become available, a supplemental medwatch report will be submitted accordingly.

Manufacturer Narrative

Device was used for treatment, not diagnosis.If information is obtained that was not available for this medwatch, a supplemental medwatch report will be filed as appropriate.Additional narrative: the initial reporter's phone number was not provided.As of this date, the device has not been returned for evaluation; therefore, the reported condition cannot be confirmed and/or duplicated.Udi: (b)(4).

Manufacturer Narrative

This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for this medwatch, a supplemental medwatch report will be filed as appropriate.H10 additional narrative: device evaluation: the actual device was returned for evaluation.During repair, it was determined that the reported condition that the motor device generated heat and produced smoke was not confirmed.Therefore, an assignable root cause for the reported condition of heat and smoke was not determined.However, during evaluation, it was determined that the device was loose, had illegible labeling etch, component damage and cord damage.It was further determined that the device failed pretest for visual assessment: verify that all markings are present and legible and visual assessment: verify that the cord is not damaged.The assignable root cause was determined to be due to component failure from wear.

• Brand Name: EMAX 2 PLUS MOTOR
• Type of Device: MOTOR, SURGICAL INSTRUMENT, AC-POWERED
• Manufacturer (Section D): DEPUY SYNTHES PRODUCTS LLC; 4500 riverside drive; palm beach gardens FL 33410
• Manufacturer Contact: kate karberg ; 4500 riverside drive; palm beach gardens, FL ; 3035526892
• MDR Report Key: 16335986
• MDR Text Key: 309257944
• Report Number: 1045834-2023-00209
• Device Sequence Number: 1
• Product Code: GEY
• UDI-Device Identifier: 00845384002055
• UDI-Public: 00845384002055
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: K080802
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,User Facility,Company Representative
• Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date: 02/09/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 02/09/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: EMAX2PLUS
• Device Catalogue Number: EMAX2PLUS
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Date Manufacturer Received: 02/15/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 01/24/2012
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1