Catalog Number CLXECP |
Device Problems
Crack (1135); Fluid/Blood Leak (1250)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 01/11/2023 |
Event Type
malfunction
|
Event Description
|
The customer contacted mallinckrodt to report they experienced a photoactivation module leak with their cellex photopheresis kit ("kit") during an extracorporeal photopheresis (ecp) treatment.The customer reported they received an alarm #8: blood leak (photoactivation chamber) alarm.The customer observed a blood leak after reinfusion was completed and a crack in the photoactivation plate was discovered.The treatment was completed and blood was returned to the patient.The customer reported the patient was in stable condition.The customer returned photographs for investigation.
|
|
Manufacturer Narrative
|
The system was used for treatment.This case is reportable as a mdr due to the reportable malfunction photoactivation module leak.Since this reportable malfunction is only associated with the kit, this mdr will only be against the kit.A batch record review for kit lot l227 was conducted.There were no non-conformances associated with this lot.This lot met all release requirements.A review of kit lot l227 shows no trends.Trends were reviewed for complaint categories, alarm #8: blood leak (photoactivation chamber) and photoactivation module leak.No trends were detected for these complaint categories.This assessment is based on the information available at the time of the investigation.At the time of this report, the analysis of the returned photographs is still in progress.A supplemental report will be filed when the analysis is complete.(b)(4).
|
|
Manufacturer Narrative
|
Photographs were returned by the customer for evaluation.The complaint kit was not returned.Review of the provided photographs verify the reported photoactivation module leak as blood is seen leaking through the crack of the photoactivation module.The smart card was not returned, therefore the alarm #8: blood leak? (photoactivation chamber) could not be verified.An alarm #8 occurs when the fluid leak detector in the photoactivation chamber has detected a fluid leak.A material trace of the photoactivation plate halves used in lot l227 found no related non-conformances.A device history record (dhr) review did not result in any related non-conformances.This kit lot passed all lot release testing.The cause of the reported alarm #8 was most likely due to the leak in the photoactivation chamber.The root cause of the photoactivation module leak could not be determined based on the available information.No further action is required at this time.This investigation is now complete.(b)(4).H.M.31 mar 2023.
|
|
Search Alerts/Recalls
|