(b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Analysis summary: according to the information received, unsealed packaging.Loss of sterility.Use of device from another lot.Reported event of the device not having a proper seal is confirmed.Received three gms805 in original packaging.Lot number was verified.Performed a visual inspection, the packaging was not sealed at one end.Performed a functional inspection, the scope cannot be inserted into the device.A two-year review of similar events revealed an occurrence rate of 0.001 for this device.Based on the product history, the upper control limit has been exceeded in the past 3 months; however, the single point does not exceed 3 devices.A two-year lot history review was conducted and found no other similar events reported for this lot number.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.A manufacturing record evaluation was performed for the finished device batch, and no non-conformances were identified.Related events captured via 2210968-2022-09045, 2210968-2023-01350 and 2210968-2023-01351.
|