• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: STRYKER NEUROVASCULAR CORK TARGET XL 360 SOFT 5MM X 15CM; DEVICE, NEUROVASCULAR EMBOLIZATION

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

STRYKER NEUROVASCULAR CORK TARGET XL 360 SOFT 5MM X 15CM; DEVICE, NEUROVASCULAR EMBOLIZATION Back to Search Results
Model Number M0036125150
Device Problems Expulsion (2933); Adverse Event Without Identified Device or Use Problem (2993)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 02/06/2023
Event Type  Injury  
Event Description
It was reported that the subject coil was implanted and herniated out or the aneurysm position.Therefore, the stent was used to recover the coil herniated and completed the procedure.The patient was discharged post procedure day 1.The patient is currently doing well without clinical consequences to the patient.
 
Manufacturer Narrative
The subject device is unavailable to manufacturer.
 
Manufacturer Narrative
Section d4: expiration date: added.Section h4: manufacturing date: added.Section d gtin: corrected from (b)(4).Due to the automated manufacturing execution system (mes) system there are controls in the manufacturing process to ensure the product met specifications upon release.The subject device was not available; therefore, a visual inspection as well as a functional evaluation could not be performed.The reported complaint could not be confirmed, and it could not be definitively determined if the device failed to meet specifications because the product was not returned.The reported event is covered in the device directions for use (dfu).As well, the risk of the reported event is documented in the risk documentation and there are current controls to mitigate the risk of the as reported event.While there are a number of potential causes for the reported issue, because review and analysis of available information failed to identify a definitive cause and the device was not returned, an assignable cause of undeterminable was assigned.
 
Event Description
It was reported that the subject coil was implanted and herniated out or the aneurysm position.Therefore, the stent was used to recover the coil herniated and completed the procedure.The patient was discharged post procedure day 1.The patient is currently doing well without clinical consequences to the patient.
 
Manufacturer Narrative
Due to the automated manufacturing execution system (mes) system there are controls in the manufacturing process to ensure the product met specifications upon release.The subject device was not available; therefore, a visual inspection as well as a functional evaluation could not be performed.The reported complaint could not be confirmed, and it could not be definitively determined if the device failed to meet specifications because the product was not returned.The reported event is covered in the device directions for use (dfu).As well, the risk of the reported event is documented in the risk documentation and there are current controls to mitigate the risk of the as reported event.While there are a number of potential causes for the reported issue, because review and analysis of available information failed to identify a definitive cause and the device was not returned, an assignable cause of undeterminable was assigned.
 
Event Description
It was reported that the subject coil was implanted and herniated out or the aneurysm position.Therefore, the stent was used to recover the coil herniated and completed the procedure.The patient was discharged post procedure day 1.The patient is currently doing well without clinical consequences to the patient.Update additional information: the mdr reports (initial /supplemental #1- mfr report # 3008881809-2023-00102 ) were originally submitted as the target coil was herniated outside the aneurysm neck and the stent was used to recover the coils herniated.Received additional information on 24-may-2024 confirmed that the reported event involved to the study citadel coil.Based on the physician¿s opinion, the citadel coil is usually supposed to keep the coil (target) in, but some cases where it doesn't.There was no device deficiency to the study citadel device.The study citadel device is currently not approved nor is it commercially sold in the usa; therefore, this citadel coil complaint is not subject to mdr reporting regulation.The manufacturer has reviewed all information and determined this event no longer meets the requirement of the reportable event for the device in question.Update additional information: 6-june-2023.Further reviewing the additional information received on 24-may-2023 as the target coil was herniated and the stent was used to recover the coils herniated, therefore, the complaint pr # (b)(4) for target xl 360 soft 5mm x 15cm is still deemed reportable and the reportability assessment decision remains unchanged.
 
Event Description
It was reported that the subject coil was implanted and herniated out or the aneurysm position.Therefore, the stent was used to recover the coil herniated and completed the procedure.The patient was discharged post procedure day 1.The patient is currently doing well without clinical consequences to the patient.Update additional information: the mdr reports (initial /supplemental #1- mfr report # 3008881809-2023-00102 ) were originally submitted as the target coil was herniated outside the aneurysm neck and the stent was used to recover the coils herniated.Received additional information on 24-may-2024 confirmed that the reported event involved to the study citadel coil.Based on the physician¿s opinion, the citadel coil is usually supposed to keep the coil (target) in, but some cases where it doesn't.There was no device deficiency to the study citadel device.The study citadel device is currently not approved nor is it commercially sold in the usa; therefore, this citadel coil complaint is not subject to mdr reporting regulation.The manufacturer has reviewed all information and determined this event no longer meets the requirement of the reportable event for the device in question.
 
Manufacturer Narrative
B1 adverse event/product problem - corrected - no adverse event and product problem b2 outcomes attributed to ae - corrected- no ' required intervention to prevent permanent impairment/damage (devices)' b5 executive summary -updated.D1 target xl 360 soft 5mm x 15cm/ catalog #/ lot# - corrected - no target involved to the reported event.H1 type of reportable event - corrected - no serious injury.The mdr reports (initial /supplemental #1- mfr report # 3008881809-2023-00102 ) were originally submitted as the target coil was herniated outside the aneurysm neck and the stent was used to recover the coils herniated.Received additional information on 24-may-2024 confirmed that the reported event involved to the study citadel coil.Based on the physician¿s opinion, the citadel coil is usually supposed to keep the coil (target) in, but some cases where it doesn't.There was no device deficiency to the study citadel device.The study citadel device is currently not approved nor is it commercially sold in the usa; therefore, this citadel coil complaint is not subject to mdr reporting regulation.The manufacturer has reviewed all information and determined this event no longer meets the requirement of the reportable event for the device in question.
 
Event Description
It was reported that the subject coil was implanted and herniated out or the aneurysm position.Therefore, the stent was used to recover the coil herniated and completed the procedure.The patient was discharged post procedure day 1.The patient is currently doing well without clinical consequences to the patient.Update additional information: the mdr reports (initial /supplemental #1- mfr report # 3008881809-2023-00102 ) were originally submitted as the target coil was herniated outside the aneurysm neck and the stent was used to recover the coils herniated.Received additional information on 24-may-2024 confirmed that the reported event involved to the study citadel coil.Based on the physician¿s opinion, the citadel coil is usually supposed to keep the coil (target) in, but some cases where it doesn't.There was no device deficiency to the study citadel device.The study citadel device is currently not approved nor is it commercially sold in the usa; therefore, this citadel coil complaint is not subject to mdr reporting regulation.The manufacturer has reviewed all information and determined this event no longer meets the requirement of the reportable event for the device in question.Update additional information: 6-june-2023.Further reviewing the additional information received on 24-may-2023 as the target coil was herniated and the stent was used to recover the coils herniated, therefore, the complaint (b)(4) for target xl 360 soft 5mm x 15cm is still deemed reportable and the reportability assessment decision remains unchanged.
 
Manufacturer Narrative
B1 adverse event/product problem - corrected - adverse event and product problem.B2 outcomes attributed to ae - corrected- required intervention to prevent permanent impairment/damage (devices)'.B5 executive summary -updated - further reviewing the additional information received on 24-may-2023 as the target coil was herniated and the stent was used to recover the coils herniated, therefore, the complaint (b)(4) for target xl 360 soft 5mm x 15cm is still deemed reportable and the reportability assessment decision remains unchanged.D1 target xl 360 soft 5mm x 15cm/ catalog #/ lot#23794193 - corrected -target was involved to the reported event.Due to the automated manufacturing execution system (mes) system there are controls in the manufacturing process to ensure the product met specifications upon release.The subject device was not available; therefore, a visual inspection as well as a functional evaluation could not be performed.The reported complaint could not be confirmed, and it could not be definitively determined if the device failed to meet specifications because the product was not returned.The reported event is covered in the device directions for use (dfu).As well, the risk of the reported event is documented in the risk documentation and there are current controls to mitigate the risk of the as reported event.While there are a number of potential causes for the reported issue, because review and analysis of available information failed to identify a definitive cause and the device was not returned, an assignable cause of undeterminable was assigned.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
TARGET XL 360 SOFT 5MM X 15CM
Type of Device
DEVICE, NEUROVASCULAR EMBOLIZATION
Manufacturer (Section D)
STRYKER NEUROVASCULAR CORK
ida industrial estate
model farm road
cork NA
EI  NA
Manufacturer (Section G)
STRYKER NEUROVASCULAR CORK
ida industrial estate
model farm road
cork NA
EI   NA
Manufacturer Contact
tara lopez
47900 bayside parkway
fremont, CA 94538
5104132500
MDR Report Key16469324
MDR Text Key310529727
Report Number3008881809-2023-00102
Device Sequence Number1
Product Code HCG
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K153658
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Health Professional
Reporter Occupation Physician
Type of Report Initial,Followup,Followup,Followup,Followup
Report Date 07/07/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model NumberM0036125150
Device Catalogue NumberM0036125150
Device Lot Number23794193
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Initial Date Manufacturer Received 02/07/2023
Initial Date FDA Received03/02/2023
Supplement Dates Manufacturer Received03/09/2023
05/24/2023
05/24/2023
07/06/2023
Supplement Dates FDA Received03/13/2023
05/26/2023
06/07/2023
07/07/2023
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Date Device Manufactured08/04/2022
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Treatment
1018 MICROCATHETER (STRYKER); GUIDE CATHETER (UNKNOWN MANUFACTURER); GUIDE SHEATH (UNKNOWN MANUFACTURER); GUIDEWIRE (UNKNOWN MANUFACTURER)
Patient Outcome(s) Required Intervention;
Patient SexMale
Patient EthnicityNon Hispanic
Patient RaceWhite
-
-