BIOSENSE WEBSTER INC CARTO VIZIGO¿ 8.5F BI-DIRECTIONAL GUIDING SHEATH - SMALL; INTRODUCER, CATHETER
|
Back to Search Results |
|
Model Number D138501 |
Device Problem
Partial Blockage (1065)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 02/21/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
E1: initial reporter phone: (b)(6).The bwi product analysis lab received the device for evaluation.The analysis has begun but is not completed at this time.When the investigational analysis has been completed, a supplemental 3500a report will be submitted.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by biosense webster, inc., or its employees that the report constitutes an admission that the product, biosense webster, inc.Or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's reference number: (b)(4).
|
|
Event Description
|
It was reported that a patient underwent an ablation procedure with a carto vizigo¿ 8.5f bi-directional guiding sheath - small and no saline came out of the sheath.The issue was noted before the procedure, at the time of preparation of goods.The issue was resolved by replacing the sheath.The procedure was completed without patient's consequence.Inadequate irrigation is mdr-reportable.
|
|
Manufacturer Narrative
|
On 6-apr-2023, bwi received additional information regarding the event.No resistance was noted between the catheter and the sheath.On 13-apr-2023, the product investigation was completed.Device evaluation details: visual analysis revealed no damage or anomalies on the sheath and the dilator.An irrigation test was performed, a syringe was connected to the stopcock of the device, and irrigation was attempted; however, a blockage of the irrigation feature was detected.A guidewire was introduced inside the hub and a blockage in this area was detected, the hub was cut and a ftir study was performed on the material occluding the irrigation feature and revealed that this material component is principally composed of methacrylate base material, presumably an adhesive.Due to this finding, a supplier manufacturing investigation was required.The supplier manufacturing investigation concluded as follows: it was confirmed that the failure mode involved a blockage of the stopcock tubing.Due to the condition of the occluded luer hub, an internal action was opened.History record was performed for the finished device 00002023 number, and no internal actions related to the reported complaint condition were identified.The issue reported by the customer was confirmed.The instruction for use (ifu) states that ¿before inserting the sheath into the patient, flush the sheath and dilator with heparinized normal saline to remove air bubbles and any potential particulate.After the sheath is in the left atrium of the patient, maintain a constant flow of heparinized normal saline to the sheath to minimize the risk of air emboli¿ and ¿flush and maintain continuous saline¿.As part of the quality process, all devices are manufactured, inspected, and released to approved specifications.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's reference number:(b)(4).
|
|
Search Alerts/Recalls
|
|
|