• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: MAQUET SAS LUCEA 40; DEVICE, MEDICAL EXAMINATION, AC POWERED

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

MAQUET SAS LUCEA 40; DEVICE, MEDICAL EXAMINATION, AC POWERED Back to Search Results
Catalog Number ARD568601997
Device Problems Fracture (1260); Detachment of Device or Device Component (2907)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 03/28/2023
Event Type  malfunction  
Manufacturer Narrative
Additional information will be provided following the conclusion of the investigation.Device not returned to manufacturer.
 
Event Description
On 28th march, 2023 getinge became aware of an issue with one of our examination lights ¿ lucea 40.As it was stated the headlight cover was broken resulting in missing particles.There was no injury reported, however we decided to report the issue in abundance of caution as any particles falling off during examination may lead to potential infection of the patient.
 
Manufacturer Narrative
Getinge became aware of an issue with one of our examination lights ¿ lucea 40.As it was stated the headlight cover was broken resulting in missing particles.Getinge technician also stated that the covers were broken due to the user not using the handle on the light and grabbing the light by the lens.There was no injury reported, however we decided to report the issue in abundance of caution as any particles falling off during examination may lead to potential infection of the patient.According to the information provided by getinge technician, the affected parts (ard368605998 - handle interface with fork - lucea 40, ard368606555 - transparent plastic cover - lucea 40) have been replaced.It was established that when the event occurred, the examination light did not meet its specification due to cracks and missing particles from covers, which contributed to the event.Provided information does not indicate if upon the event occurrence the device was or was not being used for patient treatment.Review of received customer product complaints related to investigated issue, revealed that there were no injuries to a user nor to a patient or operator when this particular malfunction occurred.We can assume that the failure ratio of cracks and missing particles on lucea 10/40 devices is moderate.Malfunction investigated herein was further analysed by subject matter experts at maquet sas.As they stated, based on some internal test done by maquet sas (e.G.Ref: cre 12-085), only abnormal use (violent collisions, excessive pressure¿) or the use of incompatible cleaning products or protocol, can damage this device as reported in this complaint.The user manual explains how to check the light heads during daily inspection.To avoid any similar incident, the lucea product must be used according with the user manual information.We believe the related devices are performing correctly in the market.We also believe that if the manufacturer recommendation had been followed the incident could have been avoided.Getinge shall continue to monitor for any further events of this nature and do not propose any further action at this time.The correction of b5 describe event and problem deems required.This is based on the internal evaluation.Previous b5 describe event and problem: on 28th march, 2023 getinge became aware of an issue with one of our examination lights ¿ lucea 40.As it was stated the headlight cover was broken resulting in missing particles.There was no injury reported, however we decided to report the issue in abundance of caution as any particles falling off during examination may lead to potential infection of the patient.Corrected b5 describe event and problem: on 21th march, 2023 getinge became aware of an issue with one of our examination lights ¿ lucea 40.As it was stated the headlight cover was broken resulting in missing particles.There was no injury reported, however we decided to report the issue in abundance of caution as any particles falling off during examination may lead to potential infection of the patient.
 
Event Description
On 21th march, 2023 getinge became aware of an issue with one of our examination lights ¿ lucea 40.As it was stated the headlight cover was broken resulting in missing particles.There was no injury reported, however we decided to report the issue in abundance of caution as any particles falling off during examination may lead to potential infection of the patient.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
LUCEA 40
Type of Device
DEVICE, MEDICAL EXAMINATION, AC POWERED
Manufacturer (Section D)
MAQUET SAS
parc de limere
avenue de la pomme de pin
ardon
Manufacturer (Section G)
MAQUET SAS
parc de limere
avenue de la pomme de pin
ardon
Manufacturer Contact
pascal jay
parc de limere
avenue de la pomme de pin
ardon 
MDR Report Key16684234
MDR Text Key312768127
Report Number9710055-2023-00287
Device Sequence Number1
Product Code KZF
Combination Product (y/n)N
Reporter Country CodeUS
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type User Facility,Company Representative
Reporter Occupation Other
Type of Report Initial,Followup
Report Date 04/05/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received04/05/2023
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Catalogue NumberARD568601997
Was Device Available for Evaluation? Yes
Is the Reporter a Health Professional? No
Date Manufacturer Received06/28/2023
Was Device Evaluated by Manufacturer? No
Date Device Manufactured12/18/2013
Is the Device Single Use? No
Type of Device Usage Reuse
Patient Sequence Number1
-
-