MAUDE Adverse Event Report: ANGIOMED GMBH & CO. MEDIZINTECHNIK KG COVERA VASCULAR COVERED STENT

Model Number AVSM10100

Device Problems Loss of or Failure to Bond (1068); Positioning Failure (1158)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 03/21/2023

Event Type  malfunction  

Event Description

It was reported that during a stent graft placement procedure in right upper cephalic vein for in-stent stenosis, the deployment wheel allegedly became loose and failed to deploy the stent.The procedure was completed using another device.There was no reported patient injury.

Manufacturer Narrative

H10: a voluntary recall has been initiated for the covera vascular covered stent which was product catalog/lot number specific.Reportedly the covera vascular covered stent has the potential to exhibit deployment issues (i.E., failure to deploy the covered stent) due to slide block bond failures in the device handle.Full or partial failure of the product to deploy is most likely to require percutaneous replacement with existing access.In rare cases, iatrogenic vascular injury may occur as the result of device withdrawal, manipulation, or abrupt/unexpected movements, particularly in the context of difficult or partial stent deployment or mispositioning.Adjunctive endovascular maneuvers may be indicated.There have been no cases where an open surgical procedure has been required.To date, there have been no reported patient injuries associated with deployment issues.As a result of the field action, this event is being reported as a malfunction reportable event.H10: as the lot number for the device was provided, a review of the device history records is currently being performed.The return of the sample is pending.The investigation of the reported event is currently underway.H10: d4 (expiry date: 08/2023).

Event Description

It was reported that during a stent graft placement procedure in right upper cephalic vein for in-stent stenosis, the deployment wheel allegedly became loose and failed to deploy the stent.The procedure was completed using another device.There was no reported patient injury.

Manufacturer Narrative

H10: a voluntary recall has been initiated for the covera vascular covered stent which was product catalog/lot number specific.Reportedly the covera vascular covered stent has the potential to exhibit deployment issues (i.E., failure to deploy the covered stent) due to slide block bond failures in the device handle.Full or partial failure of the product to deploy is most likely to require percutaneous replacement with existing access.In rare cases, iatrogenic vascular injury may occur as the result of device withdrawal, manipulation, or abrupt/unexpected movements, particularly in the context of difficult or partial stent deployment or mispositioning.Adjunctive endovascular maneuvers may be indicated.There have been no cases where an open surgical procedure has been required.To date, there have been no reported patient injuries associated with deployment issues.As a result of the field action, this event is being reported as a malfunction reportable event.H10: manufacturing review: the lot history records of this lot were reviewed with special attention to the manufacturing and inspection of this product and the product was found to have met the specification prior to shipment.Investigation summary: the delivery system was returned for evaluation.The covered stent was not deployed upon sample receipt.The slide block which is a force transmitting component was no longer connected to the proximal sheath.It is considered the disconnection of the slide block led to the impossibility to deploy the stent.Therefore, based on evaluation of the sample the inability of an adhesive joint (slide block/tether/diving sheath) to withstand tension force during deployment is confirmed.A root cause of this issue was considered to be related to a manufacturing step.Labeling review: the relevant labeling for this product was reviewed.Based on the instructions for use supplied with this product delivery system specific events that could be associated with clinical complications include but are not limited to failure to deploy and high deployment forces.H10: d4 (expiration date: 08/2023).H11: section a through f ¿ the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant/reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.H3 other text : see h10.

• Brand Name: COVERA VASCULAR COVERED STENT
• Type of Device: VASCULAR COVERED STENT
• Manufacturer (Section D): ANGIOMED GMBH & CO. MEDIZINTECHNIK KG; wachhausstr. 6; karlsruhe 76227 ; GM 76227
• Manufacturer (Section G): ANGIOMED GMBH & CO. MEDIZINTECHNIK KG; wachhausstr. 6; karlsruhe 76227 ; GM 76227
• Manufacturer Contact: brett curtice ; 800 w. rio salado pkwy; tempe, AZ 85281 ; 4803032689
• MDR Report Key: 16774107
• MDR Text Key: 313634291
• Report Number: 9681442-2023-00138
• Device Sequence Number: 1
• Product Code: PFV
• UDI-Device Identifier: 00801741106415
• UDI-Public: (01)00801741106415
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P170042
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Other,Health Professional,User Facility,Company Representative
• Reporter Occupation: Physician
• Remedial Action: Recall
• Type of Report: Initial,Followup
• Report Date: 06/07/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 04/20/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: AVSM10100
• Device Catalogue Number: AVSM10100
• Device Lot Number: ANFV2614
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 07/21/2023
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Removal/Correction Number: RES 91359
• Patient Sequence Number: 1
• Patient Sex: Female