H10: the catalog number identified in section d4 has not been cleared in the us but is similar to the fluency plus endovascular stent graft products that are cleared in the us.The pro code and 510 k number for the fluency plus endovascular stent graft products are identified in d2 and g4.H10: manufacturing review: the lot history records of this lot were reviewed with special attention to the manufacturing and inspection of this product and the product was found to have met the specification prior to shipment.Based on the information available it is not reasonably suggested that a manufacturing process may have caused or contributed to the reported issue.Investigation summary: the stent delivery system was returned for evaluation.The stent graft was found partially deployed and a stent strut was found perforating and deforming both the marker band and the outer sheath.The perforation of the sheath by the strut is assessed as being the main issue, which led to partial deployment of the stent graft.It was reported that a 0.035" guidewire/9fr introducer were used, the device was flushed, the lesion was calcified / slightly tortuous, and the device was placed in the straight segment of the lumen.Based on the provided information and the evaluation of the returned sample, the investigation is confirmed for outer sheath perforation, partial deployment, and deformation.A definite root cause for the reported event could not be determined.Labeling/packaging review: in reviewing the relevant labeling, it was found that the instructions for use sufficiently address the potential risks.Regarding the preparation of the device the instructions for use states "flush the stent graft lumen with sterile saline using a small volume syringe.Attach the syringe to the luer-lock port of the y-injection-adapter on top of the delivery system and apply positive pressure.Ensure that the 2-way stopcock is open also flush saline through the inner catheter lumen via the luer-lock port at the back of the delivery system.Flush until saline leaks from the tip of the catheter and all air is removed".Regarding the precautions prior and during deployment the instructions for use states "prior to stent graft deployment in tortuous anatomy, ensure that the proximal stent graft end is positioned in a straight section of the lumen to reduce the risk of increased deployment forces and possible failure to deploy".The instructions for use states regarding the accessories "a super stiff guide wire (0.035 in.) is advanced from a femoral artery puncture site.Use an introducer sheath for the implant procedure".H10: d4 (expiry date: 02/2025).H11: section a through f - the information provided by bd represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.H3 other text : see h10.
|