|
Model Number P7500A001475 |
Device Problems
Use of Device Problem (1670); Insufficient Information (3190)
|
Patient Problems
Pressure Sores (2326); Blister (4537)
|
Event Date 04/05/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
It was initially reported that the customer contributes an upsurge in the presence of pressure injures to the use of the progressa bed.Follow-up with the customer determined that the patient associated with this bed ((b)(4)) was reported to have phlyctène (blister) on the sacrum and right buttock ((b)(6) 2023) and stage 2 pressure injury on the sacrum and right/left buttocks ((b)(6) 2023).Medical intervention was not reported.Additionally, specific details of the event including clarification if the associated pressure injury were preexisting, or the patient¿s medical history were not provided.The progressa bed is intended to be used to treat or prevent pulmonary or other complications associated with immobility, pressure ulcers, or for any other use where medical benefits may be derived from either continuous lateral rotation therapy or percussion/vibration therapy.Additionally, the instructions for use (ifu) states the therapy surface is not a substitute for good nursing practices.Therapy modes should be used in conjunction with good assessment and protocol.Failure to follow good nursing practices may result in patient harm.The development of pressure injuries is multifactorial and cannot only be attributed to the performance of the surface or the progressa bed.Pressure injuries can develop within 2-6 hours when capillaries supplying the skin and subcutaneous tissues are compressed, causing an obstruction in blood flow, which ultimately leads to tissue necrosis.Position changes are key to pressure injury prevention and treatment.These changes need to be frequent, repositioning needs to avoid stress on the skin, and body positions need to minimize the risk of pressure on vulnerable areas.Prevention of pressure injuries involves a multidisciplinary approach including rapid identification of at-risk individuals such as those with diabetes, incontinence, impaired mobility, peripheral vascular disease, etc.And exercising a vigilant prevention protocol consisting of skincare, nutritional assessment reducing mechanical load, and utilizing support surfaces.Additionally, the device instructions for use (ifu) states the therapy surface is not a substitute for good nursing practice and the device therapy modes should be used in conjunction with good assessment and protocol.A blister is characterized by a raised fluid filled portion of your skin and may take on an intensely reddened, splotchy appearance.A blister may be painful or swell.Blisters are typically considered minor injuries, are treated as such, and will heal without any medical intervention.A stage 2 pressure injury is characterized by partial-thickness skin loss no deeper than the dermis and can include intact or ruptured blisters.Stage 2 pressure injuries can heal very rapidly therefore treatment is focused on nutrition to support wound healing and keeping the area protected/covered and clean.In this event, based on the details provided (blister and stage 2 pressure injury with no reported medical intervention) it is reasonable to conclude that the patient did not sustain permanent impairment of a body function or permanent damage to a body structure and did not require medical or surgical intervention to preclude permanent impairment of a body function or permanent damage to a body structure, which concludes no serious injury occurred.At this time, the device inspection is pending, as the reported bed remains in patient use and the customer has not made the device available for inspection.If any additional relevant information is identified following completion of the investigation, the additional relevant information will be submitted in a supplemental report.
|
|
Event Description
|
The customer contributes an upsurge of pressure injuries ranging from stage 1 to stage 3 to the use of the progressa bed.This report was filed in our complaint handling system as complaint #(b)(4).
|
|
Manufacturer Narrative
|
The customer contributes an upsurge of pressure injuries ranging from stage 1 to stage 3 to the use of the progressa bed.Follow-up with the customer determined that the patient associated with this bed (v073aw8334) was reported to have phlyctène (blister) on the sacrum and right buttock (b)(6)23) and stage 2 pressure injury on the sacrum and right/left buttocks (b)(6) 2023).Medical intervention was not reported.Additionally, specific details of the event including clarification if the associated pressure injury were preexisting, or the patient¿s medical history were not provided.The hillrom technician thoroughly evaluated the bed from the event reported by the customer.It was confirmed that the bed was functioning correctly and in accordance with the technical manual: no error codes.All values are within the ranges of the technical documentation.The pressures measured were in compliance with the expectations.No malfunction, the bed was performing within specifications.The progressa bed is intended to be used to treat or prevent pulmonary or other complications associated with immobility, pressure ulcers, or for any other use where medical benefits may be derived from either continuous lateral rotation therapy or percussion/vibration therapy.Additionally, the instructions for use (ifu) states the therapy surface is not a substitute for good nursing practices.Therapy modes should be used in conjunction with good assessment and protocol.Failure to follow good nursing practices may result in patient harm.The development of pressure injuries is multifactorial and cannot only be attributed to the performance of the surface or the progressa bed.Pressure injuries can develop within 2-6 hours when capillaries supplying the skin and subcutaneous tissues are compressed, causing an obstruction in blood flow, which ultimately leads to tissue necrosis.Position changes are key to pressure injury prevention and treatment.These changes need to be frequent, repositioning needs to avoid stress on the skin, and body positions need to minimize the risk of pressure on vulnerable areas.Prevention of pressure injuries involves a multidisciplinary approach including rapid identification of at-risk individuals such as those with diabetes, incontinence, impaired mobility, peripheral vascular disease, etc.And exercising a vigilant prevention protocol consisting of skincare, nutritional assessment reducing mechanical load, and utilizing support surfaces.Additionally, the device instructions for use (ifu) states the therapy surface is not a substitute for good nursing practice and the device therapy modes should be used in conjunction with good assessment and protocol.A blister is characterized by a raised fluid filled portion of your skin and may take on an intensely reddened, splotchy appearance.A blister may be painful or swell.Blisters are typically considered minor injuries, are treated as such, and will heal without any medical intervention.A stage 2 pressure injury is characterized by partial-thickness skin loss no deeper than the dermis and can include intact or ruptured blisters.Stage 2 pressure injuries can heal very rapidly therefore treatment is focused on nutrition to support wound healing and keeping the area protected/covered and clean.In this event, based on the details provided (blister and stage 2 pressure injury with no reported medical intervention) it is reasonable to conclude that the patient did not sustain permanent impairment of a body function or permanent damage to a body structure and did not require medical or surgical intervention to preclude permanent impairment of a body function or permanent damage to a body structure, which concludes no serious injury occurred.Additionally, the inspection ruled out a device malfunction.¿based on this information, no further action is required.
|
|
Event Description
|
The customer contributes an upsurge of pressure injuries ranging from stage 1 to stage 3 to the use of the progress a bed.This report was filed in our complaint handling system as complaint #(b)(4).
|
|
Search Alerts/Recalls
|
|
|