MAUDE Adverse Event Report: COVIDIEN LP LLC NORTH HAVEN ENDO GIA; STAPLE, IMPLANTABLE

Model Number EGIA60AMT

Device Problems Entrapment of Device (1212); Retraction Problem (1536); Adverse Event Without Identified Device or Use Problem (2993)

Patient Problem Unspecified Tissue Injury (4559)

Event Date 05/04/2023

Event Type  malfunction  

Manufacturer Narrative

Concomitant medical products: egiaustnd, egiaustnd endogia ultra univ std stap (lot#p2g0140).Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

According to the reporter, during a laparoscopic left colon resection procedure, after firing the first reload, a cashing sound was heard, the knife did not pull back, and the jaws were unable to open; it was stuck.The issue remained the same even when the surgeon jerked the handle and fiddled the green button.The surgeon created another small incision to place the new port and used another handle and additional reloads to staple beside the first reload to remove the device.This led to a little loss of tissue and the surgery took a little longer; it was extended for 30 minutes or more.The patient is currently fine.

Manufacturer Narrative

Additional information: d9, g3, h3, h6 h3 evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.The evaluation found no potentially contributing factors, and the sample met all related specifications.It was reported that the jaws of the device remain closed on tissue and after firing the device, there was resistance while attempting to retract the knife.The reported issues could not be confirmed.The most likely cause could not be identified because no related problem was detected with the device.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: ENDO GIA
• Type of Device: STAPLE, IMPLANTABLE
• Manufacturer (Section D): COVIDIEN LP LLC NORTH HAVEN; 195 mcdermott rd; north haven CT 06473
• Manufacturer (Section G): COVIDIEN LP LLC NORTH HAVEN; 195 mcdermott rd; north haven CT 06473
• Manufacturer Contact: justin ellis ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 16984017
• MDR Text Key: 315754936
• Report Number: 1219930-2023-02051
• Device Sequence Number: 1
• Product Code: GDW
• UDI-Device Identifier: 10884523003215
• UDI-Public: 10884523003215
• Combination Product (y/n): N
• Reporter Country Code: SW
• PMA/PMN Number: K111825
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date: 07/19/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 05/23/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: EGIA60AMT
• Device Catalogue Number: EGIA60AMT
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 07/03/2023
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1