MAUDE Adverse Event Report: EIT EMERGING IMPLANT TECHNOLOGIES GMBH IMPLANT INSERTER; INTERVERTEBRAL FUSION DEVICE WITH BONE GRAFT, LUMBAR

Catalog Number TET30100

Device Problem Material Deformation (2976)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 05/05/2023

Event Type  malfunction  

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: d9: complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.E3: reporter is a j&j sales representative.H3, h4, h6: without a lot number the device history records review could not be completed.The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Event Description

It was reported that on (b)(6) 2023, the instruments kept bending insitu and causing delays during surgery.Replacement requested for two of each, as this is the second instance within the last month.It is unknown if there was a surgical delay.Procedure and patient outcome were unknown.This report is for one (1) implant inserter.This is report 3 of 4 for complaint (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.The photo was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned photo.Visual analysis of the photo revealed that implant inserter was no visible.The picture does not provide enough evidence to confirm the alleged reported condition.As the device was not returned, an as-received condition could not be assessed, and a dimensional inspection and document/specification review were not completed.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was not confirmed for implant inserter.There is no indication that a design or manufacturing issue has caused the complaint condition and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: IMPLANT INSERTER
• Type of Device: INTERVERTEBRAL FUSION DEVICE WITH BONE GRAFT, LUMBAR
• Manufacturer (Section D): EIT EMERGING IMPLANT TECHNOLOGIES GMBH; eisenbahnstrasse 84; wurmlingen D-785 73
• Manufacturer (Section G): EIT EMERGING IMPLANT TECHNOLOGIES GMBH; GM
• Manufacturer Contact: daniel seng ; eisenbahnstrasse 84; wurmlingen D-785-73 ; GM D-78573 ; 6103142063
• MDR Report Key: 16985916
• MDR Text Key: 315776859
• Report Number: 3013730328-2023-00062
• Device Sequence Number: 1
• Product Code: MAX
• UDI-Device Identifier: 04260397081280
• UDI-Public: (01)04260397081280
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 05/23/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: TET30100
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 05/29/2023
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1
• Treatment: IMPLANT INSERTER; TRIAL INSERTER; TRIAL INSERTER