• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: BRAEMAR MANUFACTURING, LLC UNIT C6S, 3.0 BTH/ELCTRD, PATCH, UNIV 2CH, BOX, 40CT

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

BRAEMAR MANUFACTURING, LLC UNIT C6S, 3.0 BTH/ELCTRD, PATCH, UNIV 2CH, BOX, 40CT Back to Search Results
Model Number 02-01846
Device Problems Patient-Device Incompatibility (2682); Biocompatibility (2886)
Patient Problems Blister (4537); Skin Inflammation/ Irritation (4545)
Event Date 05/18/2023
Event Type  Injury  
Manufacturer Narrative
Engineering evaluation was unable to be performed as the electrode/device was not returned.Allegation is confirmed through description of the skin irritation and is most probable to be a bio-incompatibility issue with the electrode adhesive.The patient had preexisting skin sensitivities.Marsi, skin burn, and associated symptoms may inherently occur under the course of ecg monitoring.No single factor or combination of factors can be attributable to electrode skin irritation and associated symptoms.The product labeling advises patients of alternate options and other steps to take if skin irritation develops, including healthcare professional contact as needed.
 
Event Description
Patient reported that was sensor battery was only lasting 2 days and was not given a replacement from agent.After a few more days the sensor got hot and burned her.She said she had blisters under the sensor and electrodes in the patch.She had to take the device off.The patient was advised to take the device off and a replacement device was ordered and patient will switch to lwa (lead wire adapter).Additional information was obtained on 31 may 2023 from patient services and the patient: the patient reported that she was experiencing pain from the area where the patch was "blisters under the patch" and "sensor getting hot after charging," the blisters are like cigarette burns.The patient stated that she will be seeing her family doctor.The patient also stated that she has pre existing skin sensitivities.The patient was prescribed burn ointment and antibiotic steroids cream for second degree burns.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
UNIT C6S, 3.0 BTH/ELCTRD, PATCH, UNIV 2CH, BOX, 40CT
Type of Device
UNIT C6S, 3.0 BTH/ELCTRD, PATCH, UNIV 2CH, BOX, 40CT
Manufacturer (Section D)
BRAEMAR MANUFACTURING, LLC
1285 corporate center drive
suite 150
eagan MN 55121
Manufacturer (Section G)
BRAEMAR MANUFACTURING, LLC
1285 corporate center dr
suite 150
eagan MN 56121
MDR Report Key17105280
MDR Text Key316957449
Report Number2133409-2023-00027
Device Sequence Number1
Product Code DSI
UDI-Device IdentifierB146C6E10
UDI-PublicB146C6E10
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K171410
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Consumer,Health Professional,Distributor
Reporter Occupation Other
Type of Report Initial
Report Date 06/08/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received06/12/2023
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Lay User/Patient
Device Model Number02-01846
Device Lot NumberB146C6E10
Was Device Available for Evaluation? No
Date Manufacturer Received05/31/2023
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Other;
Patient Age39 YR
Patient SexFemale
-
-