As reported, the.035 j-curve diagnostic guidewire device was opened.The doctor prepares to pass the guide through the introducer when he observes a foreign body coming out of the guidewire.The reason for which it is not possible to pass the guide, we proceed to make the change of the input in the room to be used.The packaging of the device was damaged.The sterility of the device was compromised prior to opening.There was no reported injury to the patient.There was no difficulty removing the wire from the packaging.Extra force was not needed to remove the device.The device will not be returned.
|
As reported, the.035 j-curve diagnostic guidewire device was opened.The doctor prepared to pass the guide through the introducer when a foreign body was observed coming out of the guidewire.The reason for which it is not possible to pass the guide, we proceed to make the change of the input in the room to be used.The packaging of the device was damaged.The sterility of the device was compromised prior to opening.There was no reported injury to the patient.There was no difficulty removing the wire from the packaging.Extra force was not needed to remove the device.Requests for additional information/clarification were not provided.The device was not returned for analysis.A product history record (phr) review of lot 35268060 revealed no anomalies or non-conformances during the manufacturing and inspection processes that can be associated with the reported event.Without the return of the device the reported ¿guidewire- foreign material¿ and ¿package- compromised sterility¿ could not be confirmed or further clarified, nor a definitive cause for the event established.The cordis diagnostic j wire does not have a lumen.According to the instructions for use, which is not intended as a mitigation of risk, ¿do not use the if the product if the package is open or damaged.Do not withdraw a ptfe coated wire through a metal-cannula needle.Withdrawal may damage the guidewire coating.If strong resistance is met during manipulation, discontinue the procedure and determine the cause of resistance before proceeding.If the cause of the resistance cannot be determined, withdraw the catheter and guidewire¿.Review of the available information suggests that procedural and or handling factors may have contributed to the reported event.Based on the information available and the phr review, there is no indication that the event is related to the device design or manufacturing process.Therefore, no preventative or corrective actions will be taken at this time.
|