STRYKER NEUROVASCULAR CORK TARGET XXL 360 8MM X 20CM; DEVICE, NEUROVASCULAR EMBOLIZATION
|
Back to Search Results |
|
Model Number M0036180820 |
Device Problem
Premature Activation (1484)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 05/25/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
The device is not available to the manufacturer.
|
|
Event Description
|
It was reported that, during a neurovascular procedure, the subject coil got prematurely detached during use.The subject coil was retrieved out of the patients body along with the microcatheter.The subject coil was replaced and the procedure was completed successfully.No clinical consequences were reported to the patient due to this event.
|
|
Event Description
|
It was reported that, during a neurovascular procedure, the subject coil got prematurely detached during use.The subject coil was retrieved out of the patients body along with the microcatheter.The subject coil was replaced and the procedure was completed successfully.No clinical consequences were reported to the patient due to this event.
|
|
Manufacturer Narrative
|
B1: adverse event/product problem ¿ corrected - no ¿product problem¿.H1: type of reportable event ¿ corrected - no ¿malfunction¿.Due to the automated mes system there are controls in the manufacturing process to ensure the product met specifications upon release.Upon visual/microscopic inspection of the returned subject coil the coil proximal contact was seen to be kinked/bent, the coil delivery wire was noted to be kinked/bent, the main coil was seen to be attached to the detachment zone, the main coil was seen to be severely stretched as per photo and the coil suture was seen to be broken.Functional inspection was not required.The reported main coil prematurely detached/separated during use was not confirmed during analysis.The reported event is covered in the device directions for use (dfu).As well, the risk of the reported event is documented in the risk documentation and there are current controls to mitigate the risk of the as reported event.The reported event was not confirmed based on analysis.The device failed to meet specifications when received for complaint investigation based on the analyzed anomalies noted to the device.Additional information provided by the customer is the device was prepared for use as per the dfu.There was no damage noted to the packaging prior to opening the packaging.The device was confirmed to be in good condition during preparation/ prior to use on the patient.Continuous flush was set up and maintained throughout the clinical procedure.During analysis it was noted, the main coil was severely stretched but not detached or separated from the delivery wire.The coil proximal contact and delivery wire were both seen to be kinked/bent.An assignable cause of not confirmed will be assigned to the as reported 'main coil prematurely detached/separated during use' as the event was not confirmed during the analysis only the coil was severely stretched from the detachment zone.An assignable cause of procedural factors will be assigned to the as analyzed main coil stretched and nv - main coil suture damaged' as these defects appears to be associated with a product that met stryker design and manufacturing specifications and was used in accordance with the dfu, but performance was limited due to procedural factors during use.An assignable cause of handling damage will be assigned to the as analyzed 'coil proximal contact kinked/bent' and 'coil delivery wire kinked/bent' as the issue is due to handling of the product or portion of the product during the clinical procedure.The manufacturer has reviewed all information and determined this event no longer meets the requirement of the reportable event for the device in question.
|
|
Search Alerts/Recalls
|
|
|