MAUDE Adverse Event Report: COVIDIEN LP LLC NORTH HAVEN UNKNOWN EGIA TRI STAPLE; STAPLE, IMPLANTABLE

Model Number UNKNOWN EGIA TRI STAPLE

Device Problems Entrapment of Device (1212); Retraction Problem (1536); Difficult to Open or Close (2921); Adverse Event Without Identified Device or Use Problem (2993); Firing Problem (4011); Physical Resistance/Sticking (4012)

Patient Problems Tissue Breakdown (2681); Unspecified Tissue Injury (4559)

Event Date 06/14/2023

Event Type  malfunction  

Event Description

According to the reporter, during a procedure, while stapling the vascular tissue, the ratchet mechanism felt more difficult on firing and it took tons of force to release the device once it was deployed.Since it was vascular the staple line was concerning to the surgeon, therefore, it was reinforced with suture and clips.

Manufacturer Narrative

D10 concomitant product: egiauxl - egiauxl endogia ultra univ xl stapler, lot# unknown.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.

Manufacturer Narrative

Correction: h6 (rfr-fdd, fdp, ime updated) additional information: a4, g3 medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

According to the reporter, during a robot assisted left radical nephrectomy procedure, the device was slightly angled and while stapling the vascular tissue, the device fired okay.However, when the return knob (switch) was pulled back, the device was sticky and it did not open all at once.The surgeon had to pull hard to release the device.Another reload was used, but the same issue occurred.Since it was vascular, the staple line was concerning to the surgeon, therefore, it was reinforced with suture and clips.The surgeon also used a new handle and reload which were able to work fine.

• Brand Name: UNKNOWN EGIA TRI STAPLE
• Type of Device: STAPLE, IMPLANTABLE
• Manufacturer (Section D): COVIDIEN LP LLC NORTH HAVEN; 195 mcdermott rd; north haven CT 06473
• Manufacturer (Section G): COVIDIEN LP LLC NORTH HAVEN; 195 mcdermott rd; north haven CT 06473
• Manufacturer Contact: justin ellis ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 17275062
• MDR Text Key: 318696289
• Report Number: 1219930-2023-02823
• Device Sequence Number: 1
• Product Code: GDW
• Combination Product (y/n): N
• Reporter Country Code: US
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup
• Report Date: 08/11/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 07/06/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: UNKNOWN EGIA TRI STAPLE
• Device Catalogue Number: UNKNOWN EGIA TRI STAPLE
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 07/25/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: SEE H10
• Patient Age: 81 YR
• Patient Sex: Male
• Patient Weight: 98 KG