Model Number FV284T |
Device Problem
Material Rupture (1546)
|
Patient Problem
Hydrocephalus (3272)
|
Event Date 05/29/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
Manufacturing site evaluation: investigation on-going.Should relevant additional information / investigation results become available, a supplemental medwatch report will be submitted.
|
|
Event Description
|
It was reported that during insertion of the catheter into the introducer canal, the catheter detaches from the valve (#fv284t).The complainant device will returned to the manufacturer for evaluation.No patient complications were reported.
|
|
Manufacturer Narrative
|
Manufacturing and quality control data: due to the limited information and the missing product investigation is restricted to traceability of manufacturing and quality control data.The paedigav was manufactured by a qualified employee in december 2021.Deviations during assembly did not occur.The product was finally tested as article fv284t and released for packaging and sterilization and was sterilized by miethke.The parameters after completion of the valve assembly were tested at the fixed pressures of 4 cmh2o in the horizontal and 24 cmh2o in the vertical position and were found to meet specifications.All tested parameters were assessed according to specifications.Conclusion information : an investigation was not possible as no product was sent in for examination.Based on the form of our final quality control and the performance of the passed tension test prior to sterilization and shipment, we can exclude the presence of a defect at the time of delivery of the paedigav.During the final quality control, the product met all specifications.If a product fails the tension test, it will be discarded and not released for packaging and sterilisation.Unfortunately, we cannot provide a meaningful analysis due to the missing sample.
|
|
Event Description
|
No sample returned for analysis.The case is closed with the recording of the production data.
|
|
Manufacturer Narrative
|
Investigation: visual inspection: during the investigation, disconnected catheter visible at the end of the valve and a dispositioned kink protection were determined.Summary of the investigation results: during the investigation, we can determine that the visible separation line is tapered.How the abovementioned occurrence is not clear to us at the time of examination.Based on additional testings of catheter rupture, a vertical separation line could be detected, see the following picture.Prior all shipments of products with catheters a tension test is performed, which was documented in a final documentation.The returned product passed a successfully test.So, it could be exclude a presence of a defect at the time of delivery, since the final documentation proves a successfully completed test.No further actions are required as a result of the complaint.
|
|
Event Description
|
The sample was returned for evaluation to the manufacturer on (b)(6) 2023.
|
|
Search Alerts/Recalls
|