MAUDE Adverse Event Report: MAZOR ROBOTICS LTD MAZOR X SYSTEM; ORTHOPEDIC STEREOTAXIC INSTRUMENT

Model Number TPL0059

Device Problem Imprecision (1307)

Patient Problem Numbness (2415)

Event Date 06/26/2023

Event Type  Injury  

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

Medtronic received information regarding a guidance system being used during a spinal procedure.It was reported that there was an alleged inaccuracy.The site was operating from t12 to pelvis and the surgeon believed the right l2 screw was approximately 2-3 mm medial from the plan.The surgeon took the screw out and replaced it free handed.They were then able to continue on with the surgery.The patient reported some numbness in their leg.There was a 15 minute delay to the procedure.The patient was affected.

Event Description

Additional information was received stating that the patient recovered.It was slight numbness in the leg.The issues were resolved.

Manufacturer Narrative

H2) see b5.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H2: see b5 medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

Additional information was received stating that this issue was with workflow.The surgeon admitted that he should have lateralized the screw.There was no known harm to the patient.According to the manufacturer representative that was present during surgery, the surgeon was pushing up against the machine and he didn't trust it and so it was placed medially himself.

• Brand Name: MAZOR X SYSTEM
• Type of Device: ORTHOPEDIC STEREOTAXIC INSTRUMENT
• Manufacturer (Section D): MAZOR ROBOTICS LTD; 5 shacham street; p.o. box 3104; caesarea hefa,il 30795 67; IS 3079567
• Manufacturer (Section G): MAZOR ROBOTICS LTD; 5 shacham street; p.o. box 3104; caesarea hefa,il 30795 67; IS 3079567
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 17372228
• MDR Text Key: 319537461
• Report Number: 3005075696-2023-00042
• Device Sequence Number: 1
• Product Code: OLO
• UDI-Device Identifier: 07290109183213
• UDI-Public: 07290109183213
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K182077
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup
• Report Date: 09/05/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 07/21/2023
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: TPL0059
• Device Catalogue Number: TPL0059
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 08/28/2023
• Was Device Evaluated by Manufacturer?: No
• Date Device Manufactured: 07/19/2020
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1
• Patient Outcome(s): Disability
• Patient Age: 75 YR
• Patient Sex: Female
• Patient Weight: 86 KG