ICU MEDICAL DE MEXICO, S. DE R.L. DE C.V. 13" SMALLBORE QUADFUSE EXT SET W/3 MICROCLAVE® (GLOW, 2 RED RINGS), 0.2 MICRON F; STOPCOCK, I.V. SET
|
Back to Search Results |
|
Catalog Number B33902 |
Device Problems
Crack (1135); Fluid/Blood Leak (1250); Separation Failure (2547); Insufficient Information (3190)
|
Patient Problems
Insufficient Information (4580); No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 07/01/2023 |
Event Type
malfunction
|
Event Description
|
The event occurred on an unspecified date and involved a 13" smallbore quadfuse ext set w/3 microclave® (glow, 2 red rings), 0.2 micron filter, 4 clamps, rotating luer.It was reported that the device had a cracked filter which led to a bad patient outcome requiring unspecified intervention.No specific harm was reported.There is no additional information pertaining to the reported complaint at this time.
|
|
Manufacturer Narrative
|
It is unknown if the device is available for evaluation.The device has been requested to be returned, however, it has not yet been received.
|
|
Event Description
|
Updated information from the customer was received on 26-jul-2023 stating that the involved lot number is 13605717 and that the product was used before the issue was noticed.The defective product was infusing with tpn and lipids when leakage occurred several times.The patient generated positive blood culture tests, which required unspecified medical intervention.Although there was a delay in therapy while the tubing was changed out, there was no harm to the patient.
|
|
Manufacturer Narrative
|
The device was returned for evaluation; however, testing has not yet been completed.Additional information can be found in b5, b6, d4, d9, d10, h4 and h6.
|
|
Manufacturer Narrative
|
One used sample item #b33902 was returned for evaluation.As received the outlet filter was separated from the rest of the device.No presence of solvent in the tube, neither in the filter port through uv (ultraviolet) light were observed.No additional damage or anomalies were observed along the set.The customer's complaint can be confirmed based on the physical used sample evaluation.As received, the outlet filter was separated from the rest of the device.The probable cause was due to insufficient solvent applied during the manual assembly (manufacturing) process.Updated information from the manufacturer can be found in g1.
|
|
Search Alerts/Recalls
|
|
|