• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: FRESENIUS HEMOCARE GMBH FRESENIUS COM.TEC AUTOMATED CELL SEPARATOR

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

FRESENIUS HEMOCARE GMBH FRESENIUS COM.TEC AUTOMATED CELL SEPARATOR Back to Search Results
Model Number N/A
Device Problem Pumping Problem (3016)
Patient Problem Unspecified Heart Problem (4454)
Event Date 07/11/2023
Event Type  Death  
Event Description
Per fresenius kabi france, a report was received of an unconscious patient admitted for plasma exchange.The team mounted a pl1 kit (material 940401c, batch mlt 161) on the comtec (material c9008021, serial (b)(6) and proceeded with the purge.All went well.The ides validated the steps on the comtec up to the patient connection phase.The ides connected the inlet and return lines to the patient's catheter and set up the saline drip.Normally, the procedure can then be started, but the team was waiting for bags of fresh frozen plasma as a substitute liquid to start the procedure.After an estimated 20 minutes, with the procedure still to be started, the patient began to experience heart problems.The team attended to the patient, investigating the possible causes of the malaise in relation to the patient's pathology and the medication administered.After an estimated 60 minutes, the team disconnected the patient, at which point they realized that the acd bag was completely empty.The patient died.No alarm was triggered on the device.A test was performed, and the drip was very weak.Upon examining the unit, it was noted there was a problem with the pump head of the acd pump on the comtec device; a plastic part seemed to be broken.The device has been taken out of service while this event is under investigation.Note: the comtec device material c9008021 is not marketed in the us.However, a similar device material 9008031 is marketed in the us under 510k k060734.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
FRESENIUS COM.TEC AUTOMATED CELL SEPARATOR
Type of Device
FRESENIUS COM.TEC AUTOMATED CELL SEPARATOR
Manufacturer (Section D)
FRESENIUS HEMOCARE GMBH
gruener weg 10
friedberg hessen, D-611 69
GM  D-61169
MDR Report Key17591185
MDR Text Key321597805
Report Number3004548776-2023-00273
Device Sequence Number1
Product Code LKN
Combination Product (y/n)N
Reporter Country CodeFR
Number of Events Reported1
Summary Report (Y/N)N
Report Source Distributor
Reporter Occupation Other Health Care Professional
Type of Report Initial
Report Date 07/12/2023,08/21/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received08/21/2023
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Other
Device Model NumberN/A
Device Catalogue NumberC9008021
Device Lot NumberN/A
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Distributor Facility Aware Date07/12/2023
Event Location Other
Date Report to Manufacturer07/12/2023
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
Patient Outcome(s) Death;
-
-