Product complaint #(b)(4).Investigation summary: according to the information received, ¿it was reported that the 20 star driver tip broke off while inserting metaglene could not retrieve and lodged into set screw head.Ended up pulling metaglene implant off while in the process inserter tip cold welded into glenosphere.Had to implant new glenosphere.No surgical delay.¿ the device associated with this report was returned to depuy synthes for evaluation.Visual examination of the device confirmed that the glenosphere extractor tip is jammed inside the glenosphere 40+8.Additionally, the inner threads of the glenosphere appear to be stripped and a small fragment of the taper has broken off most likely due to extraction process.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces such as excessive force or off axis threading of the device.The overall complaint was confirmed as the observed condition of the glenosphere 40+8 would contribute to the complained device issue.Based on the investigation findings, potential cause can be attributed to unintended use error and it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.H6: component code: appropriate term/code not available (g07002) used to capture no findings available.This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|