MAUDE Adverse Event Report: DEPUY SYNTHES PRODUCTS LLC EMAX 2 PLUS MOTOR; MOTOR, SURGICAL INSTRUMENT, AC-POWERED

Catalog Number EMAX2PLUS

Device Problems Mechanical Problem (1384); Excessive Heating (4030)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/01/2023

Event Type  malfunction  

Manufacturer Narrative

This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: as of this date, the device has not been returned for evaluation; therefore, the reported condition cannot be confirmed and/or duplicated.Udi:(b)(4).

Event Description

It was reported from turkey that the motor device had a lever lock defect and was heating.It was not reported if the device was used in surgery, or if there was patient involvement.It was not reported if there were any delays in a surgical procedure, or if a spare device was available for use.It was not reported if there were any injuries, medical intervention or prolonged hospitalization.The exact date of this event was unknown but was noted to have occurred in 2023.All available information has been disclosed.If additional information should become available, a supplemental report will be submitted accordingly.

Manufacturer Narrative

This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: upon follow up with the reporter, it was additionally reported that there was a problem with the attachment connection part of the device.The knurled knob did not lock.

Manufacturer Narrative

This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: the actual device was returned for evaluation.The device was evaluated and it was determined that the reported condition that the device had a lever lock defect and was heating was not confirmed.Therefore, the assignable root cause was not determined.However, during evaluation, it was determined that the device displayed an e6 error code indicating overheat warning and failed pretest for no short circuit between sensor gnd and connector body.The assignable root cause was determined to be traced to component failure from wear.

• Brand Name: EMAX 2 PLUS MOTOR
• Type of Device: MOTOR, SURGICAL INSTRUMENT, AC-POWERED
• Manufacturer (Section D): DEPUY SYNTHES PRODUCTS LLC; 4500 riverside drive; palm beach gardens FL 33410
• Manufacturer Contact: kate karberg ; 4500 riverside drive; palm beach gardens, FL 33410 ; 3035526892
• MDR Report Key: 17718927
• MDR Text Key: 323055451
• Report Number: 1045834-2023-01319
• Device Sequence Number: 1
• Product Code: GEY
• UDI-Device Identifier: 84538400205
• UDI-Public: 84538400205
• Combination Product (y/n): N
• Reporter Country Code: TU
• PMA/PMN Number: K080802
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,User Facility
• Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup
• Report Date: 09/11/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 09/11/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: EMAX2PLUS
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Date Manufacturer Received: 10/09/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 12/05/2011
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1