|
Catalog Number FEM12080 |
Device Problems
Break (1069); Misfire (2532); Detachment of Device or Device Component (2907)
|
Patient Problem
Foreign Body In Patient (2687)
|
Event Date 08/29/2023 |
Event Type
Injury
|
Manufacturer Narrative
|
H10: as the lot number for the device was provided, a review of the device history records will be performed.The device has been returned to the manufacturer for evaluation.The investigation of the reported event is currently underway.H10: d4 (expiry date: 03/2026).H11: section a through f: the information provide by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant/reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.
|
|
Event Description
|
It was reported that during a stent placement procedure, resistance was felt upon deploying the stent.It was further reported that the proximal end of the stent allegedly delayed in opening due to the initial resistance.Reportedly, when the stent opened, the proximal tip of the catheter allegedly popped off and floated into the patients lungs.It was further reported that tip was unable to be snared.The current status of the patient is unknown.
|
|
Manufacturer Narrative
|
H10: manufacturing review: the lot history records of this lot were reviewed with special attention to the manufacturing and inspection of this product and the product was found to have met the specification prior to shipment.Based on the information available it is not reasonably suggested that a manufacturing process may have caused or contributed to the reported issue.Investigation summary: the stent graft delivery system was returned for evaluation.The distal part of the outer catheter including the radiopaque marker band was found broken and missing.No indication for a manufacturing related cause could be found.No x-ray images were provided to verify the reported migration of the segment.Based on the provided information and the evaluation of the returned sample, breakage of the distal end of the delivery system catheter was confirmed.As reported the segment detached and floated into the patient lungs.The partial stent deployment prior to catheter breakage could not be confirmed, based on information available.A definite root cause for the reported event could not be determined.Labeling review: relevant labeling for this product was reviewed.The instruction for use states: "if unusual resistance or high deployment force is encountered during stent graft deployment, abort the procedure, remove the delivery system and use an alternative device." regarding preparation of the device the instruction for use states: "prior to loading the vascular system over a guide wire, both ports must be flushed with sterile saline (.).Flushing these lumens will also facilitate stent graft deployment".Regarding the anatomy of the placement site the instruction for use states: "prior to stent graft deployment (.), ensure that the proximal stent graft end is positioned in a straight section of the lumen to reduce the risk of increased deployment forces and possible failure to deploy".Regarding accessories the instruction for use states: "prepare a stiff 0.035" guidewire per its instructions for use and advance the guidewire under fluoroscopy to the target location.The use of an appropriately sized introducer sheath is recommended".The packaging pictograms indicate an introducer size of 10f and a 0.035" guidewire.With regards to stent placement, the ifu states "post dilate the stent graft with an angioplasty balloon sized appropriately as to ensure complete wall apposition to the reference vessel".The instruction for use also mentions detachment of device parts as a potential complication.H10: b5, d4 (expiry date: 03/2026), g3 , h6 (device).H11: section a through f: the information provide by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant/reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.
|
|
Event Description
|
It was reported that during a stent graft placement procedure to treat a fistulogram, resistance was met during the stent graft deploying attempt.It was further reported that the proximal end of the stent graft allegedly delayed in opening due to this initial resistance and when it opened the proximal tip of the catheter allegedly popped off and floated into the patient¿s lungs.Reportedly, multiple unsuccessful attempts were made to snare the tip.Patient¿s status is unknown.
|
|
Search Alerts/Recalls
|
|
|