During an atrioventricular node ablation procedure, output issues requiring troubleshooting measures resulted in a procedural delay.The generator and catheter were replaced and the procedure was completed with no adverse consequences to the patient.The ablation catheter was inserted into the patient but an error message on the ampere generator read "generator malfunction" and then read "catheter not connected".The cable was replaced twice, and the catheter was exchanged.The ampere was rebooted, but the error message remained.After troubleshooting, it was determined that the issue was with the ampere.The procedure was completed using a non-abbott (biosense webster) generator and catheter.There were no adverse consequences to the patient.
|