MAUDE Adverse Event Report: MEDTRONIC NAVIGATION, INC (LITTLETON) O-ARM 1000 IMAGING SYSTEM 3RD EDITION; IMAGE-INTENSIFIED FLUOROSCOPIC X-RAY SYSTEM, M

Model Number BI70000028120

Device Problems Failure to Advance (2524); Material Deformation (2976); Positioning Problem (3009); Noise, Audible (3273)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 10/16/2023

Event Type  malfunction  

Manufacturer Narrative

H3,h6) no parts have been received by the manufacturer for evaluation.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

Medtronic received information regarding an imaging system being used during a sacroiliac and thoracolumbar procedure.It was reported that the site extended the gantry and it made a really loud noise.Then after the spin, the gantry hit the arm board and a piece of the cover came off.After they brought the system in the hallway, the gantry would not fully extend and was having issues docking.There was no delay and no impact on patient outcome.

Manufacturer Narrative

Continuation of d10: section d information references the main component of the system.Other relevant device(s) are: product id bi71000699 medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3, h6) a manufacturer representative (rep) went to the site to test the imaging system.The rep found damage on left side of generator cover including slide for bellows cover.The damaged screw was replaced and the covers were adjusted.The system then performed as intended.Codes b01, c07, and d02 are applicable.H2) a2 and a4) patient information was unavailable from the site.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: O-ARM 1000 IMAGING SYSTEM 3RD EDITION
• Type of Device: IMAGE-INTENSIFIED FLUOROSCOPIC X-RAY SYSTEM, M
• Manufacturer (Section D): MEDTRONIC NAVIGATION, INC (LITTLETON); 300 foster st; littleton MA 01460
• Manufacturer (Section G): MEDTRONIC NAVIGATION, INC (LITTLETON); 300 foster st; littleton MA 01460
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 17956558
• MDR Text Key: 325922045
• Report Number: 3004785967-2023-00643
• Device Sequence Number: 1
• Product Code: OXO
• UDI-Device Identifier: 00643169353428
• UDI-Public: 00643169353428
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K092564
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup
• Report Date: 11/06/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 10/18/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: BI70000028120
• Device Catalogue Number: BI70000028120
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 10/28/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 11/11/2015
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1
• Treatment: SEE H10...; SEE H10....
• Patient Sex: Male