MAUDE Adverse Event Report: COVIDIEN MEDICAL PRODUCTS EMPRINT; ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES

Model Number CA15L2

Device Problems Peeled/Delaminated (1454); Difficult or Delayed Activation (2577); Detachment of Device or Device Component (2907)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 09/27/2023

Event Type  malfunction  

Event Description

According to the reporter, during a procedure, the cauterization of the device was weaker than when it was normally used.The cauterization bubble finally appeared after 45w 1 minute 75w 2 minutes 100w 1 minute.The device was changed into another one, re-cauterization was performed, and the procedure was completed without any problem.It was noted that the coating at about 3cm of the tip was found to be slightly peeling off.There was no patient injury.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.Visual inspection noted the insulation on the shaft was damaged.It was reported that the cauterization of the device was weaker than when it was normally used.The reported issue was confirmed.The product analysis noted evidence that the device was not used as intended.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

According to the reporter, during a procedure, the cauterization of the device was weaker than when it was normally used.The cauterization bubble finally appeared after 45w 1 minute / 75w 2 minutes / 100w 1 minute.The device was changed into another one, re-cauterization was performed, and the procedure was completed without any problem.It was noted that the coating at about 3cm of the tip was found to be slightly peeling but was not detached from the needle.There was no patient injury.

• Brand Name: EMPRINT
• Type of Device: ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES
• Manufacturer (Section D): COVIDIEN MEDICAL PRODUCTS; building 10- no 789 puxing roa; shanghai 20111 4; CH 201114
• Manufacturer (Section G): COVIDIEN MEDICAL PRODUCTS; building 10- no 789 puxing roa; shanghai 20111 4; CH 201114
• Manufacturer Contact: justin ellis ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 17966610
• MDR Text Key: 326611004
• Report Number: 3006451981-2023-00140
• Device Sequence Number: 1
• Product Code: GEI
• UDI-Device Identifier: 10884521806542
• UDI-Public: 10884521806542
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: K163105
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup
• Report Date: 12/22/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 10/19/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: CA15L2
• Device Catalogue Number: CA15L2
• Device Lot Number: S23BG011
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 10/13/2023
• Is the Reporter a Health Professional?: No
• Date Manufacturer Received: 11/29/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 02/18/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1