Catalog Number 221836152 |
Device Problems
Entrapment of Device (1212); Detachment of Device or Device Component (2907)
|
Patient Problems
Foreign Body In Patient (2687); No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 11/03/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
Product complaint (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Event Description
|
During a total hip arthroplasty, after inserting the trial liner insert, a part of the trial liner insert broke off and remained within the patient¿s body.The patient was not harmed.Additional information as reported to israeli moh, it is as translated from the local hebrew form with additional information: during the operation, the surgeon positioned the cup component as acceptable and then made use of trial tools, which are multi-use tools (found in the hospital) designed to allow the surgeon to verify the suitability of the additional components (in terms of size and angle) before opening the sterile implants and implanting them.In this framework, trial liner was used, among other things.Upon completion of using the trial tool, the trial tool was unscrewed and the surgeon completed the operation with the sterile implants.In the imaging taken after the surgery was completed, a small horseshoe-shaped metallic component was observed near the left acetabulum (on the patient's body near the surgical area).From an examination carried out in the operating room, it was found that the aforementioned metal component apparently detached from the outer screwing area of the trial liner which was used during the operation without being noticed during the operation.According to the surgeon, no damage was caused to the patient and according to his clinical judgment there is no reason to perform another surgical intervention to remove the above-mentioned component.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).Investigation summary : during a total hip arthroplasty, after inserting the trial liner insert, a part of the trial liner insert broke off and remained within the patient¿s body.The patient was not harmed.The device associated with this report was returned to depuy synthes for evaluation.Visual analysis of the returned device found that the pin trl lnr 10d 520dx36id revealed that the screw fell apart from the rest of the device.Broken portion was returned.No other defect was found.No evidence was provided to confirm the foreign body left on patient condition.The observed condition of the snap ring its consistent with over-tightening the threaded insert during use.Regarding the deep scratches, this type of damage is consistent with other tools and hard edges coming in contact with the device, properly handling and attention to the approved use of the device diminishes the risk of failure.The overall complaint was confirmed as the observed condition of the pin trl lnr 10d 520dx36id would contribute to the complained device issue.Based on the investigation findings, the potential cause is traced to unintended use error.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot : the product investigation found no evidence suspecting an error in the manufacturing or material that would be a contributing factor in the reported allegation(s).A manufacturing records evaluation (mre) was not performed.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Search Alerts/Recalls
|
|