MAUDE Adverse Event Report: MEDTRONIC IRELAND ONYX TRUCOR; STENT, CORONARY, DRUG-ELUTING

Model Number TRCR22512X

Device Problems Difficult to Remove (1528); Device Dislodged or Dislocated (2923); Positioning Problem (3009)

Patient Problems Device Embedded In Tissue or Plaque (3165); Insufficient Information (4580)

Event Date 11/01/2023

Event Type  Injury  

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

The patient was hospitalized for respiratory failure of mixed cause.A catheterization was performed which showed a severely calcified left anterior descending (lad) artery with a severe obstruction, and a critical obstruction in the circumflex (cx) artery with no evidence of significant calcification but with angulated birth (moderate vessel caliber).An attempt was made to use one onyx trucor coronary drug eluting stent to treat the lesions.The lesion was pre-dilated.The device did not pass through a previously deployed stent.Resistance was not encountered when advancing the device.Excessive force was not used during delivery of the device.It was reported that the device dislodged from the balloon.It was detailed that a wire and balloon were advanced without complications.The onyx trucor stent was then advanced, however, the stent could not be sent to the implantation site in the middle segment, and it was decided to remove the device without implantation, and then perform further ballooning and finally implant the stent.However, during stent removal maneuvers, which did not require unusual effort, the stent was found to be dismounted from the balloon and was free in the coronary artery trunk towards the cx artery.Different maneuvers were performed to progress the stent towards the vessel without success, and so the stent was then attempted to be extracted.The stent was successfully extracted from the coronary artery and taken to the access site, but the stent remains lodged at the level of the right radial artery.The dislodged stent was implanted in the patient's radial artery.The patient is alive with no further injury.

Manufacturer Narrative

Additional information: the onyx trucor stent was being used to treat the lesion in the circumflex artery.The device was inspected before use with no issues noted.There was some resistance noted during device removal due to the angulated origin of the vessel but excessive force was not used.Patient weight provided.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Additional information: the device was prepped per ifu.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Image analysis: a set of fluoroscopic images were provided.They showed diffuse disease in the left coronary system.The target lesion was pre-dilated but there was still evidence of diffuse disease in the vasculature after pre-dilation.The angulation from the left main into the lad and lcx was tortuous and calcified.Post removal of the balloon a dislodged stent can be seen in the left main and in the distal portion of the guide catheter.When pulling the stent back into the guide catheter the stent dislodged.Delivery of the stent was not provided on the images.After removal of the delivery system attempts were made to remove the dislodged stent with another device.The stent was subsequently removed into the radial artery.The final angiographic images did not show any further treatment of the left coronary arteries.Based on the event description and the images the possibility exists that the vessel was too tortuous and diseased to facilitate successful delivery of the stent and the stent security was impacted.There was no evidence of stent deformation on the images provided.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Image analysis: one video was provided for review.The video shows the attempted removal of the dislodged stent from the vasculature through the radial artery.The dislodgement is confirmed.The root cause cannot be confirmed from the images provided.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: ONYX TRUCOR
• Type of Device: STENT, CORONARY, DRUG-ELUTING
• Manufacturer (Section D): MEDTRONIC IRELAND; parkmore business park west; galway ; EI
• Manufacturer (Section G): MEDTRONIC IRELAND; parkmore business park west; galway ; EI
• Manufacturer Contact: alison sweeney ; parkmore business park west; galway ; EI ; 091708096
• MDR Report Key: 18158417
• MDR Text Key: 328355567
• Report Number: 9612164-2023-05363
• Device Sequence Number: 1
• Product Code: NIQ
• Combination Product (y/n): N
• Reporter Country Code: AR
• PMA/PMN Number: P160043
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup,Followup,Followup
• Report Date: 02/28/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 11/17/2023
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: TRCR22512X
• Device Catalogue Number: TRCR22512X
• Device Lot Number: 0011717654
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 02/27/2024
• Date Device Manufactured: 04/04/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Required Intervention
• Patient Age: 77 YR
• Patient Sex: Male
• Patient Weight: 100 KG