MAUDE Adverse Event Report: DEPUY IRELAND - 9616671 ATTUNE ADJ TIB STYLUS; ATTUNE INSTRUMENTS : ALIGNMENT DEVICES

Catalog Number 254400007

Device Problem Structural Problem (2506)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 11/10/2023

Event Type  malfunction  

Event Description

It was reported that the stylus does not lock in and freely floats back and forth.

Manufacturer Narrative

Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.

Manufacturer Narrative

Product complaint # : (b)(4).Investigation summary : an analysis of the product could not be performed since a physical sample was not received for evaluation.As part of our company quality system process, all devices are manufactured, inspected, and distributed to approved specifications.Additional complaint information monitoring for potential safety signals will be conducted through complaint trending as part of the post-market surveillance.However, if the product is received at a later date, the investigation will be updated as applicable.

Manufacturer Narrative

Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: added: a1, a3, d9 if information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Corrected: h3.

Manufacturer Narrative

Product complaint # (b)(4).Investigation summary : it was reported that the stylus does not lock in and freely floats back and forth.The product was returned to depuy synthese for evaluation.The depuy synthese team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that the dents of the pointer subassembly exhibit a worn condition, causing the pointer to move freely through the housing.The reporting complain condition was able to be replicated.Additionally, the attune adj tib stylus presents an overall worn appearance consistent with constant and normal usage for over 9 years.The observed condition was identified as an end of life indicator; damage consistent with repeated use and servicing.The lifecycle requirements of the device are event related and depend on the use and inspection of the device in clinical practice.As the device can be damaged on the first or 100th use, the device must be properly inspected prior to each surgical use.Refer to the device/country specific ifu for information related to end of life, reprocessing instructions, and inspection procedures.The overall complaint was confirmed as the observed condition of the attune adj tib stylus would have contributed to the complained issue.Based on the investigation findings, the potential cause is traced to end of life, and it has been determined that no corrective and/or preventative action is required.As part of depuy synthese quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot : the product investigation found no evidence suspecting an error in the manufacturing or material that would be a contributing factor in the reported allegation(s).A manufacturing records evaluation (mre) was not performed.

• Brand Name: ATTUNE ADJ TIB STYLUS
• Type of Device: ATTUNE INSTRUMENTS : ALIGNMENT DEVICES
• Manufacturer (Section D): DEPUY IRELAND - 9616671; loughbeg ringaskiddy co.; cork ; EI
• Manufacturer (Section G): DEPUY ORTHOPAEDICS, INC. 1818910; 700 orthopaedic dr.; warsaw IN 46581 0988
• Manufacturer Contact: kate karberg ; 700 orthopaedic dr.; warsaw, IN 46581-0988 ; 3035526892
• MDR Report Key: 18158853
• MDR Text Key: 328385377
• Report Number: 1818910-2023-23503
• Device Sequence Number: 1
• Product Code: HWT
• UDI-Device Identifier: 10603295129790
• UDI-Public: 10603295129790
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup,Followup
• Report Date: 11/17/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 11/17/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 254400007
• Device Lot Number: NW150646
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 01/31/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 10/15/2014
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1
• Patient Sex: Female