MAQUET CARDIOVASCULAR LLC VASOVIEW HEMOPRO, OUS; ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES
|
Back to Search Results |
|
Model Number VH-3000-W |
Device Problems
Thermal Decomposition of Device (1071); Peeled/Delaminated (1454); Flare or Flash (2942)
|
Patient Problems
Insufficient Information (4580); No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 10/23/2023 |
Event Type
malfunction
|
Event Description
|
The hospital reported that during an endoscopic vein harvesting procedure, after the vasoview hempro (ous) vh-3000 is powered on, the current spark phenomenon occurs directly at the block clamp port, and then an open flame appears.It seemed the jaws burnt due to the open flame.Yes, the device remained activated.The medical staff cut off the power in time, so there was no accident.And then the doctor used another new one to complete the surgery.
|
|
Manufacturer Narrative
|
Tw id#: (b)(4).The device has not yet been returned to maquet cardiac surgery for evaluation.We are following up with the customer for the return of the device.A supplemental report will be submitted if the device is received.
|
|
Manufacturer Narrative
|
Trackwise#: (b)(4).
|
|
Event Description
|
The hospital reported that during an endoscopic vein harvesting procedure, after the vasoview hempro (ous) vh-3000 is powered on, the current spark phenomenon occurs directly at the block clamp port, and then an open flame appears.It seemed the jaws burnt due to the open flame.Yes, the device remained activated.The medical staff cut off the power in time, so there was no accident.And then the doctor used another new one to complete the surgery.There was no delay for the procedure.There was no harm to the patient.
|
|
Manufacturer Narrative
|
Trackwise#: (b)(4).The device was not returned to maquet cardiac surgery for investigation; however photographs were provided by the account.A photographic evaluation was conducted.Signs of clinical use and evidence of blood was observed.There were no visual defects observed on the intact heater wire.Thermal decomposition was observed on both the gray cold and hot jaws, indicated by the brownish color on various parts on both the cold and hot jaw gray silicone insulation.The tip of the hot jaw was also observed to be peeled from the hot jaw.The gray silicone insulation on the cold jaw was not observed to be peeled.No flames were observed in the photographs.Based on the photographic evaluation, the reported failures "thermal decomposition of device" and peeled; delaminated; jaw" was confirmed.The reported failure "flash" was not confirmed.The lot # 3000293031 history record review was completed.There was an ncmr documented for the reported lot number.Based on the dhr/lhr review results, it was determined that there is no relation between the batch manufacturing process and the reported failures.H3 other text : device discarded.
|
|
Event Description
|
N/a.
|
|
Search Alerts/Recalls
|
|
|