MAUDE Adverse Event Report: SANMINA -SCI SYSTEMS O-ARM O2 IMAGING SYSTEM; INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM

Model Number BI70002000

Device Problems Device Damaged Prior to Use (2284); Failure to Advance (2524); Application Program Problem (2880); Noise, Audible (3273)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 11/16/2023

Event Type  malfunction  

Event Description

Medtronic received information regarding an imaging system being used outside of a procedure.It was reported that as soon as the medtronic representative (rep) hit the "reset" button, the system began to beep "aggressively".The pendant displayed "system docked".The gantry was able to move as expected, but the drive bar was not functioning as intended, but the rest of the system was able to power up without any additional issue.A reboot did not resolve the issue.Manual clutch was "all the way out" and was confirmed to be in the proper position to enable driving.Enabled the brake, and the beeping stopped but the rep was unable to use the drive bar. there was no patient involvement.

Manufacturer Narrative

Section d references the main component of the system.Other medical products in use during the event include: product id: bi71000463, lot number: unknown; product id: bi71000953r, lot number: unknown.H3, h6: no products were received by the manufacturer for analysis.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3 - a manufacturer representative went to the site to service the system.Testing found continuous beeping from digital drive board.Went to install the new drive board, found that the j12 connector on the board is upside down.Replaced and calibrated the digital drive board.System is no longer beeping.But will not drive properly.Even with the clutch out, the left drive chain is not moving.The motor is bound up.The drive chain shakes a little when the motor is first engaged, but does not turn.The motor is making a whining noise.Checked tp on digital drive board and verified voltage increases when the strain guage is pushed forward, and decreases when the strain guage is pulled back.The encoded cable pins were not bent when pulled the cable off, but got bent, when plugging it back in.H6 - evaluation codes b01, c02, d02 apply to the system checkout.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3, d9: the bi71000953r rgn dmc rfb was returned for analysis on 2024-1-4.Functional testing determined that the component was malfu nctioning.B01, c02, d02 applies.The o2 bi71000953 rgn dgtl mtn cont was returned for analysis on 2024-01-02.Functional testing determined the component was malfunc tioning.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: O-ARM O2 IMAGING SYSTEM
• Type of Device: INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM
• Manufacturer (Section D): SANMINA -SCI SYSTEMS; km 15.5 no. 29, plant 06; carr. chapala-guadalajara,jal 45640 ; MX 45640
• Manufacturer (Section G): SANMINA -SCI SYSTEMS; km 15.5 no. 29, plant 06; carr. chapala-guadalajara,jal 45640 ; MX 45640
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 18191382
• MDR Text Key: 328796845
• Report Number: 3006544299-2023-00781
• Device Sequence Number: 1
• Product Code: OWB
• UDI-Device Identifier: 00763000616564
• UDI-Public: 00763000616564
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K200074
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Company Representative
• Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 02/28/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 11/22/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: BI70002000
• Device Catalogue Number: BI70002000
• Device Lot Number: C3466
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Manufacturer Received: 02/08/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 05/05/2023
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1
• Treatment: SEE H10...