MAUDE Adverse Event Report: MICROMAR INDUSTRIA E COMERCIO LTDA EASYDRILL PERFORATOR; DRILLS, BURRS, TREPHINES & ACCESSORIES (COMPOU

Model Number DM0010FAA

Device Problems Device Remains Activated (1525); No Apparent Adverse Event (3189)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 11/03/2023

Event Type  malfunction  

Manufacturer Narrative

No conclusion can be drawn.No evaluation was performed, as the device was not returned.If the device is returned in the future, product analysis may be performed.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

It was reported that perforator continues to run.No patient impact was reported.Additional information regarding the patient impact was being followed up from the facility.

Manufacturer Narrative

Product analysis for pli 20: evaluation could not reproduce the reported malfunction.It was not that there was no failure found.Pli-30:evaluation determined that driver dog pin corroded.The likely cause of failure is inadequate preventative maintenance.It was also noted laser markings faded.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

On follow up it was reported that there was no patient or staff impact.And there was no delay, no intervention was performed and perforator didn't stop spinning but the doctor stopped the drill before a plunge.

Manufacturer Narrative

Product analysis: pli 40: evaluation determined that the device pressure gauge is broken/cracked.The likely cause of failure is due to inadequate pre ventive maintenance.It was also noted that bent swivel fitting.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

• Brand Name: EASYDRILL PERFORATOR
• Type of Device: DRILLS, BURRS, TREPHINES & ACCESSORIES (COMPOU
• Manufacturer (Section D): MICROMAR INDUSTRIA E COMERCIO LTDA; cnpj: 53.168.142/0001-29; av. marginal ao corrego da ser; sao paulo,sp 76137 ; BR 76137
• Manufacturer (Section G): MICROMAR INDUSTRIA E COMERCIO LTDA; cnpj: 53.168.142/0001-29; av. marginal ao corrego da ser; sao paulo,sp 76137 ; BR 76137
• Manufacturer Contact: natalia matos ; cnpj: 53.168.142/0001-29; av. marginal ao corrego da ser; sao paulo,sp 09980--39 ; BR 09980-39 ; 140575722
• MDR Report Key: 18274528
• MDR Text Key: 329835970
• Report Number: 1625507-2023-00297
• Device Sequence Number: 1
• Product Code: HBF
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K141455
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 03/21/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 12/06/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: DM0010FAA
• Device Catalogue Number: DM0010FAA
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 02/26/2024
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1