• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: W. L. GORE & ASSOCIATES, INC. GORE® EXCLUDER® AAA ENDOPROSTHESIS; SYSTEM, ENDOVASCULAR GRAFT, AORTIC ANEURYSM TREATMENT

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

W. L. GORE & ASSOCIATES, INC. GORE® EXCLUDER® AAA ENDOPROSTHESIS; SYSTEM, ENDOVASCULAR GRAFT, AORTIC ANEURYSM TREATMENT Back to Search Results
Catalog Number RLT261412J
Device Problems Unintended Movement (3026); Migration (4003)
Patient Problem Obstruction/Occlusion (2422)
Event Date 11/17/2023
Event Type  Injury  
Manufacturer Narrative
H.6: code c19: a review of manufacturing records verified that the lot involved in this complaint met all pre-release specifications.H.6: code b20: device remains implanted and therefore not available for direct analysis.H.6.: code d12: according to the gore® excluder® aaa endoprosthesis instructions for use (ifu), potential device or procedure-related adverse events that may occur and/or require intervention include, but are not limited to, migration, device/native vessel obstruction and, or occlusion.H.6.: code d1102: according to the gore® excluder® aaa endoprosthesis instructions for use (ifu), physician and patient should review the risks and benefits when discussing this endovascular device and procedure, including possibility that subsequent interventional or open surgical repair of the aneurysm may be required after initial endovascular repair.According to the gore® excluder® aaa endoprosthesis instructions for use (ifu), potential device or procedure-related adverse events that may occur and/or require intervention include, but are not limited to; improper component placement, and component migration.W.L.Gore & associates, inc.(gore) is submitting this report to comply with 21 c.F.R.Part 803, the medical device reporting regulation.This report is based upon information obtained by gore, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Blank fields present on this report include required fields and fields determined to be not applicable.Blank required fields indicate that the information was not provided, was deemed unavailable or was not applicable.This report does not constitute an admission or a conclusion by fda, gore, or its associates that the device, gore or its associates caused or contributed to the event described in the report.In particular, this report does not constitute a legal admission by anyone that the product described in this report has any defects or has malfunctioned, as defined from a legal standpoint.These words are included in the report and are fixed items for selection created by the fda, to categorize the type of event solely for the purpose of reporting pursuant to part 803.This statement should be included with any information or report disclosed to the public under the freedom of information act.
 
Event Description
The following information was reported to gore: on (b)(6) 2015, this patient underwent emergency endovascular treatment for an imminent rupture of an abdominal aortic aneurysm using gore® excluder® aaa endoprosthesis.A trunk - ipsilateral leg endoprosthesis (rlt261412j) was implanted from under the renal arteries.The patient tolerated the procedure.On an unknown date, migration of the rlt261412j to the distal side (distance: approximately 25 mm) was observed.On (b)(6) 2023, a reintervention was performed using gore® excluder® conformable aaa endoprosthesis.Aortic extender endoprosthesis (cxa360005) was to be implanted proximally to the migrated rlt261412j overlapping 2cm.However, during deployment of the cxa360005 from under the renal artery, it moved to proximally, resulting partial coverage of the right renal artery.Reportedly, the physician deployed the cxa360005 slowly (slow deploy).Also it was reported that the cxa360005, which began slowly deploying from one side of the distal (cxa360005 is deployed from distal one side, so usually it looked as if it was temporarily lifted one side), hit the rlt261412j during full deployment, causing it to jamp proximally.Because the deployment position of the cxa360005 was moved proximally, resulting in a shortened overlap with the rlt261412j, a second aortic extender endoprosthesis (cxa360005) was to be additionally implanted.When the second cxa360005 was deployed, the landing position of the left distal side became proximal than expected, and the distal side of the second cxa360005 was deployed at an angle.Therefore, a third aortic extender endoprosthesis (pla360400j) was additionally implanted.An attempt was made to implant an additional stent to treat the partial coverage of the right renal artery, but cannulation to the right renal artery was unsuccessful, so the procedure was completed with no treatment for the right renal artery coverage.There was no delay in blood flow to the right renal artery.On (b)(6) 2023, the patient's renal function declined, and an emergency reintervention was performed.However, cannulation to the right renal artery was unsuccessful again, the procedure was terminated without any treatment.The patient developed right renal failure and was placed on dialysis.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
GORE® EXCLUDER® AAA ENDOPROSTHESIS
Type of Device
SYSTEM, ENDOVASCULAR GRAFT, AORTIC ANEURYSM TREATMENT
Manufacturer (Section D)
W. L. GORE & ASSOCIATES, INC.
1505 n. fourth street
flagstaff AZ 86004
Manufacturer (Section G)
MEDICAL WOODY SPRINGS B/P
3450 w. kiltie lane
flagstaff AZ 86005
Manufacturer Contact
kathryn irwin
1505 n. fourth street
flagstaff, AZ 86004
9285263030
MDR Report Key18315184
MDR Text Key330328791
Report Number2017233-2023-04470
Device Sequence Number1
Product Code MIH
Combination Product (y/n)N
Reporter Country CodeJA
PMA/PMN Number
P020004
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,Company Representative
Reporter Occupation Physician
Type of Report Initial
Report Date 12/12/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received12/12/2023
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Health Professional
Device Expiration Date05/31/2018
Device Catalogue NumberRLT261412J
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Date Manufacturer Received11/17/2023
Date Device Manufactured06/01/2015
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Other;
Patient Age80 YR
Patient SexMale
-
-