Catalog Number 1400325-15 |
Device Problems
Device Damaged by Another Device (2915); Difficult to Advance (2920)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 11/29/2023 |
Event Type
malfunction
|
Event Description
|
It was reported that the procedure was to treat a short lesion in the proximal left anterior descending (plad) artery.The versaturn guide wire was advanced.Pre-dilatation was performed using a 2.5x12 trek rx balloon dilatation catheter (bdc) followed with the first optical coherence tomography (oct) run in the lad.The 3.25x28mmmm xience skypoint stent was then implanted.The 3.25x15mm nc trek neo bdc was used for post dilatation, however, there was resistance felt at the proximal edge of the xience skypoint stent, due to the bdc not being able to bend the curve of the vessel and after pushing slightly was able to advance to the distal portion of the stent and dilatation was performed without issues.Another oct run was performed to check the placement of the stent and upon evaluation of the oct image, it was noted that there was significant malapposition of the stent and an absence of stent struts on the opposing wall which was confirmed in the longitudinal mode display demonstrating that 2 of the proximal stent struts were prolapsed on one another.The opposing wall of the stent had lifted from the wall causing a >300 micron malapposition.The physician then decided to inflate a 3.5 x12 trek rx balloon proximally in order to ensure appropriate apposition without issues.Another oct run was performed to evaluate the result of the 3.5 balloon inflation.Results demonstrated a complete resolution to the malapposition.The versaturn wire was removed and the case was completed without incidence.Patient was discharged without complication.There was no adverse patient effect and although there was small delay in the procedure, there was no patient harm.No additional information was provided.
|
|
Manufacturer Narrative
|
Manufacturer's investigation is still pending at this time.Results and conclusions will be provided in the final report.The additional device referenced in b5 are filed under separate medwatch report number.
|
|
Event Description
|
It was reported that the procedure was to treat a short lesion in the proximal left anterior descending (plad) artery.The versaturn guide wire was advanced.Pre-dilatation was performed using a 2.5x12 trek rx balloon dilatation catheter (bdc) followed with the first optical coherence tomography (oct) run in the lad.The 3.25x28mmmm xience skypoint stent was then implanted.The 3.25x15mm nc trek neo bdc was used for post dilatation, however, there was resistance felt at the proximal edge of the xience skypoint stent, due to the bdc not being able to bend the curve of the vessel and after pushing slightly was able to advance to the distal portion of the stent and dilatation was performed without issues.Another oct run was performed to check the placement of the stent and upon evaluation of the oct image, it was noted that there was significant malapposition of the stent and an absence of stent struts on the opposing wall which was confirmed in the longitudinal mode display demonstrating that 2 of the proximal stent struts were prolapsed on one another.The opposing wall of the stent had lifted from the wall causing a >300 micron malapposition.The physician then decided to inflate a 3.5 x12 trek rx balloon proximally in order to ensure appropriate apposition without issues.Another oct run was performed to evaluate the result of the 3.5 balloon inflation.Results demonstrated a complete resolution to the malapposition.The versaturn guide wire was removed and the case was completed without incidence.Patient was discharged without complication.There was no adverse patient effect and although there was small delay in the procedure, there was no patient harm.Subsequent to the initially filed mdr, the following information was provided: the access site was radial and there was 90% stenosis.No additional information was provided.
|
|
Manufacturer Narrative
|
The device was not returned for evaluation.A review of the lot history record identified no manufacturing nonconformities issued to the reported lot that would have contributed to this event.Additionally, a review of the complaint history identified no other similar incidents and/or complaints from this lot.A cine was received and reviewed by an abbott vascular clinical specialist.The complaint summary states that a 3.25 x 28 mm xience skypoint stent was successfully implanted in a proximal left anterior descending artery.A 3.25 x 15 mm nc trek neo was then inserted to perform stent post-dilatation.The nc trek was noted to encounter resistance when entering the proximal portion of the deployed stent.After ¿pushing slightly¿ the nc trek entered the stent and post-dilatation was performed without issue.After post-dilatation, an oct pullback was performed that showed malapposition of the proximal stent, this was confirmed in the provided media (photos) associated with the complaint.Repeat stent post-dilatation was performed with a 3.5 x 12 trek rx, resolving the stent malposition.The investigation determined the reported difficulties appear to be related to circumstances of the procedure.There is no indication of a product quality issue with respects to the design, manufacture, or labeling of the device.D9, h3: device returning status update from yes to no.
|
|
Search Alerts/Recalls
|
|