• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: SORIN GROUP ITALIA PAS CORONARY PERFUSION CANNULA; CATETHER

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

SORIN GROUP ITALIA PAS CORONARY PERFUSION CANNULA; CATETHER Back to Search Results
Model Number P616-30
Device Problems Break (1069); Detachment of Device or Device Component (2907)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 10/23/2023
Event Type  malfunction  
Manufacturer Narrative
A.1.-a.5.Patient information were not provided.H.10.Sorin group italia manufactures the cannula cardioplegial.The incident occurred in italy.The cannula was used in an emergency case and before its use, in the preparation and connection phase with a syringe full of blood to proceed with the selective perfusion of the coronary arteries, they noticed that the tip had broken.The cannula was immediately replaced and did not come into contact with the patient.Unfortunately, the piece is not available.If any additional information pertinent to the reported event is received, it will be provided in a supplemental report.This report was due on november 25, 2023; however, due to a network disruption at livanova, the ability to submit mdrs was lost on november 19, 2023, before this report was ready to submit.The report was prepared and submitted immediately following restoration of the livanova systems.
 
Event Description
Sorin group italia has received a report that, at the begin of a procedure, medical team identified the outer portion of the cannula was detached.There is no report of any patiet injury.
 
Manufacturer Narrative
A photo was provided as evidence, showing that the silicone part was detached from the angled adapter in the cannula tip.The silicone part and the adaptor are co-molded and bought from a livanova supplier.The adhesion of the silicon part to the rigid part of the tip is not verified during the in-line manufacturing steps in livanova.Complaints history review was performed and no further events involving noticed product lot was identified thus excluding any systematic quality issue.The most likely root cause of the reported event was a defect of the tip as supplied by the livanova supplier.The supplier has been formally informed of the issue and internal investigation did not reproduce the issue.The risk is in the acceptable region.No specific action was currently deemed necessary.Livanova will keep monitoring the market.
 
Event Description
See initial report.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
PAS CORONARY PERFUSION CANNULA
Type of Device
CATETHER
Manufacturer (Section D)
SORIN GROUP ITALIA
strada statale 12 nord, 86
mirandola
Manufacturer (Section G)
LIVANOVA DEUTSCHLAND GMBH
lindberghstrasse 25
munich 80309
GM   80309
Manufacturer Contact
enrico greco
14401 w. 65th way
arvada, CO 80004
MDR Report Key18333788
MDR Text Key330553520
Report Number9680841-2023-00044
Device Sequence Number1
Product Code DWF
UDI-Device Identifier08033178004169
UDI-Public(01)08033178004169(17)260405(10)2304060004(11)230406(240)P616-30
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K022280
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Health Professional
Reporter Occupation Other
Remedial Action Other
Type of Report Initial,Followup
Report Date 02/12/2024
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received12/15/2023
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model NumberP616-30
Device Lot Number2304060004
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? No
Was the Report Sent to FDA? No
Date Manufacturer Received01/18/2024
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Date Device Manufactured04/06/2023
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-