MAUDE Adverse Event Report: BIOSENSE WEBSTER INC THERMOCOOL® SMART TOUCH® SF UNI-DIRECTIONAL NAVIGATION CATHETER; CARDIAC ABLATION PERCUTANEOUS CATHETER

Catalog Number D134701

Device Problems Material Puncture/Hole (1504); Failure to Sense (1559)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 10/05/2023

Event Type  malfunction  

Manufacturer Narrative

The product investigation was completed.Device evaluation details: the smart touch unidirectional sf device was returned to biosense webster (bwi) for evaluation.A visual inspection and screening test of the returned device were performed following bwi procedures.Visual analysis revealed that there was a reddish material inside the pebax and a rupture on the surface of the tip area.The magnetic and force feature were tested, and no errors were observed.The force values and the vector were observed within specifications.No force issues were observed.However, the rupture at the pebax could be related to the issue reported by de customer.The root cause of the rupture at the pebax cannot be determined; however, based on the information available, the condition observed most likely was originated in someplace external to the manufacturing environment.All units are inspected prior to leaving the facility as there are functional tests and inspections at control points based on the process flow diagram (pfd) per its part number to avoid this type of damage from leaving the facility.A manufacturing record evaluation was performed for the finished device 31072187l number, and no internal actions related to the reported complaint condition were identified.The issue reported by the customer was confirmed.It should be noted that product failure is multifactorial.The instructions for use (ifu) contain the following recommendations: to ensure accurate force readings, verify that the force reading is near zero when the catheter is not in contact with tissue.If the force reading is not near zero when the catheter is not in contact with tissue, perform zeroing.If the force problem persists, replace the catheter cable or the catheter.In order to prevent damage to the catheter tip, use the insertion tube supplied with the catheter to advance or retract the catheter through the hemostasis valve of the sheath.After insertion, slide the insertion tube back toward the handle.As part of biosense webster's quality process, all devices are manufactured, inspected, and released to approved specifications.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's reference number: (b)(4).

Event Description

It was reported that a patient underwent an atrial fibrillation (afib) paroxysmal cardiac ablation procedure with a thermocool® smart touch® sf uni-directional navigation catheter and post procedure the bwi product analysis lab identified a rupture on the surface of the pebax tip.During the procedure, a force sensor error (code unknown) appeared on the carto 3 system while the stsf catheter was connected.The cable was reseated and exchanged without resolution.The stsf catheter was exchanged and the issues resolved.The case continued successfully.No patient consequences were reported.

• Brand Name: THERMOCOOL® SMART TOUCH® SF UNI-DIRECTIONAL NAVIGATION CATHETER
• Type of Device: CARDIAC ABLATION PERCUTANEOUS CATHETER
• Manufacturer (Section D): BIOSENSE WEBSTER INC; 31 technology drive, suite 200; irvine CA 92618
• Manufacturer (Section G): BIOSENSE WEBSTER INC (JUAREZ); circuito interior norte; 1820parque industrial salvacar; juarez 32599 ; MX 32599
• Manufacturer Contact: kate karberg ; 31 technology dr; irvine, CA 92618 ; 3035526892
• MDR Report Key: 18414863
• MDR Text Key: 331716182
• Report Number: 2029046-2023-03121
• Device Sequence Number: 1
• Product Code: LPB
• UDI-Device Identifier: 10846835009774
• UDI-Public: 10846835009774
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P030031
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional
• Reporter Occupation: Other
• Type of Report: Initial
• Report Date: 12/28/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 12/28/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: D134701
• Device Lot Number: 31072187L
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 10/27/2023
• Date Manufacturer Received: 12/04/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 05/21/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: CARTO 3 SYSTEM.