MAUDE Adverse Event Report: HILL-ROM MEXICO ADVANTA 2 FRAME; BED, MANUAL

Model Number P1190A000148

Device Problem No Audible Alarm (1019)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 12/04/2023

Event Type  malfunction  

Event Description

Baxter received a report from a baxter technician stating the bed was not sending nurse call when the bed exit alarm was active.The bed was located at the account.There was no patient/user injury reported.This report was filed in our complaint handling system as complaint # (b)(4).

Manufacturer Narrative

The baxter technician found the siderail interface board needed to be replaced.Per the hillrom service manual the advanta¿ 2 should be subject to an effective maintenance program.This will help make sure of a long, operative life for the advanta¿ 2 bed.The preventative maintenance will help to reduce downtime due to excessive wear failures.An annual service of the bed is advised in order to maintain its characteristics and performance.Sidecom communication system: inspect and test the communication junction box.Make sure the sidecom® communication system features operate correctly.Inspect the communication cable, including the male and female pins in the plug.Replace as necessary.A search of the baxter maintenance records did not show baxter performed any preventative maintenance on this bed.It is unknown if the facility performs preventative maintenance on their beds.The technician replaced the siderail interface board to resolve the reported event.Based on this information, no further action is required.

• Brand Name: ADVANTA 2 FRAME
• Type of Device: BED, MANUAL
• Manufacturer (Section D): HILL-ROM MEXICO; ave.del telefono no. 200 col. huinala; apodaca, nuevo leon 66640 ; MX 66640
• Manufacturer Contact: brad wheeler ; 1069 state route 46 east; batesville, IN 47006 ; 3128199307
• MDR Report Key: 18422095
• MDR Text Key: 331685527
• Report Number: 3006697241-2023-00146
• Device Sequence Number: 1
• Product Code: FNJ
• Combination Product (y/n): N
• Reporter Country Code: US
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: User Facility,Company Representative
• Reporter Occupation: Other
• Type of Report: Initial
• Report Date: 12/29/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 12/29/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Model Number: P1190A000148
• Was Device Available for Evaluation?: Yes
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 12/04/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 02/03/2015
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1