MAUDE Adverse Event Report: MEDTRONIC MEXICO SPRINTER LEGEND RX; CATHETERS, TRANSLUMINAL CORONARY ANGIOPLASTY,

Model Number SPL25012X

Device Problems Inflation Problem (1310); Leak/Splash (1354); Material Deformation (2976)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 12/21/2023

Event Type  malfunction  

Event Description

An attempt was made to use one sprinter legend rx balloon catheter to treat a lesion.The device was inspected with no issues noted.Negative prep was performed with no issues noted.The lesion was not pre-dilated.The device did not pass through a previously deployed stent.Resistance was not encountered when advancing the device.Excessive force was not used during delivery.It was reported that inflation difficulties occurred during balloon inflation at 8atm.It was detailed that the balloon would not inflate during inflation, it was then observed under fluoroscopy that the balloon was leaking.The patient is alive with no injury.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Additional information: the patient presented to the hospital with a heart attack and was taken to the cath lab for intervention.The device was being used to pre-dilate the lesion.While attempting to dial up pressure, it was not possible to get to the nominal pressure of 8 atm.The pressure would go up and then instantly drop to 0 atm again.Under fluoroscopy it could be visibly seen that the balloon was going up and there was visible contrast leaking from the balloon.The leak occurred on the first inflation.The device was not moved or repositioned while inflated.The same inflation device was successfully used with other devices.Both the insufflator and balloon were then removed and the case was finished with all new products without any issues.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Product analysis summary: the device returned to medtronic for evaluation.The device returned with balloon folds expanded with contrast visible in the balloon.No deformation evident to the distal tip.The balloon failed negative prep.On pressurisation of the device, liquid was observed exiting the distal tip suggesting a leak on the inner member.The balloon failed to maintain pressure.The outer shaft was removed.Upon visual inspection, a tear was observed on the inner member proximal to the distal marker band.No other deformation evident to the remainder of the device.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Additional information: annex d code.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: SPRINTER LEGEND RX
• Type of Device: CATHETERS, TRANSLUMINAL CORONARY ANGIOPLASTY,
• Manufacturer (Section D): MEDTRONIC MEXICO; av. paseo del cucapah #10510; tijuana,bc 22570 ; MX 22570
• Manufacturer (Section G): MEDTRONIC MEXICO; av. paseo del cucapah #10510; tijuana,bc 22570 ; MX 22570
• Manufacturer Contact: alison sweeney ; parkmore business park west; galway ; EI ; 091708096
• MDR Report Key: 18462247
• MDR Text Key: 332275456
• Report Number: 9612164-2024-00111
• Device Sequence Number: 1
• Product Code: LOX
• UDI-Device Identifier: 00613994902832
• UDI-Public: 00613994902832
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P790017
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup,Followup
• Report Date: 02/28/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 01/08/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: SPL25012X
• Device Catalogue Number: SPL25012X
• Device Lot Number: 226865239
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 02/27/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 06/28/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1