MAUDE Adverse Event Report: EDWARDS LIFESCIENCES EDWARDS INTUITY ELITE VALVE SYSTEM; HEART-VALVE, NON-ALLOGRAFT TISSUE

Model Number 8300AB

Device Problem Perivalvular Leak (1457)

Patient Problem Hemolysis (1886)

Event Type  Injury  

Event Description

Edwards received notification that an intuity elite valve will be explanted after an implant duration of approximately one (1) year due to moderate paravalvular leak and hemolysis.

Manufacturer Narrative

H10: additional manufacturer narrative: the subject device is not available for evaluation as it remains implanted in the patient.The investigation is still in progress; therefore, a conclusion has yet to be established.A supplemental report will be submitted accordingly upon investigation completion.Edwards will continue to review and monitor all reported events.Trends are monitored on a monthly basis and if action is required, appropriate investigation will be performed.

Manufacturer Narrative

Updated section b4 (date of this report), g3 (date received by manufacturer), h6 (type of investigation), h6 (investigation findings) and h6 (investigations conclusions).H10: additional manufacturer narrative: the serial number was not provided.Therefore, the device history record (dhr) could not be reviewed.Despite due diligent attempts to receive further information regarding this event, no additional information was received from the customer.Regurgitation is considered to be a perivalvular leak (pvl) if a turbulent eccentric jet originates between the bioprosthetic sewing ring and the annulus.Pvl can occur in the mitral and aortic position for similar reasons.In the early postoperative period, the highest incidence of pvl has been seen in patients developing infective endocarditis, which is most likely attributed to inadequate peri-operative antibiotic prophylaxis or nosocomial infection.Annular calcification is also a risk factor for the development of peri-operative pvl as the bioprosthesis may not seat properly after debridement.Technique related factors, such as incorrect valve sizing, have been shown to contribute to the development of pvl.Anatomical factors may create difficulty seating the bioprosthetic valve resulting in pvl.The anatomy of the annulus may induce mechanical stresses along the rigid bioprosthetic ring which can influence long-term valve performance and durability.A diseased or rigid annulus can potentially increase the mechanical stress on the prosthetic valve, leading to pvl.The instructions for use (ifu) have been reviewed and no inadequacies have been identified with regard to warnings, contraindications, and the directions/conditions for the successful use of the device.The reported type of event is included in the ifu.A definitive root cause cannot be conclusively determined; however, patient factors likely caused or contributed.

Manufacturer Narrative

Updated section b4 (date of this report), g3 (date received by manufacturer) and h6 (health effect - impact code).

• Brand Name: EDWARDS INTUITY ELITE VALVE SYSTEM
• Type of Device: HEART-VALVE, NON-ALLOGRAFT TISSUE
• Manufacturer (Section D): EDWARDS LIFESCIENCES; one edwards way; irvine CA 92614
• Manufacturer (Section G): EDWARDS LIFESCIENCES; one edwards way; irvine CA 92614
• Manufacturer Contact: saurav singh ; one edwards way; mle fl2 office m2013; irvine, CA 92614 ; 9492506615
• MDR Report Key: 18502358
• MDR Text Key: 332768636
• Report Number: 2015691-2024-00331
• Device Sequence Number: 1
• Product Code: LWR
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P150036
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup
• Report Date: 02/16/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 01/12/2024
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Model Number: 8300AB
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 02/16/2024
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Required Intervention; Life Threatening