MAUDE Adverse Event Report: SANMINA -SCI SYSTEMS O-ARM O2 IMAGING SYSTEM; INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM

Model Number BI70002000

Device Problem Incorrect, Inadequate or Imprecise Result or Readings (1535)

Patient Problems Spinal Cord Injury (2432); No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/19/2024

Event Type  Injury  

Manufacturer Narrative

The system was serviced in the field and the system was accurate.The manufacturer representative (rep) took multiple shots and 3d spins.System was functioning as intended medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

Medtronic received information regarding an imaging system being used during a sacroiliac and thoracolumbar procedure.It was reported that a manufacturer representative (rep) was in an l4-l5 fusion with decompression case and both screws were misplaced by a couple of millimeters.The rep said after the two screws were placed, a confirmation spin was taken where they discovered the screws were not placed accurately.The surgeon aborted use of the navigation system and the imaging system.No additional information was available. there was a 30 minute delay in surgery.Patient outcome was not provided.

Event Description

Additional information received from a manufacturer representative indicated that the screw went through the canal of the patient and navigation was aborted after the accuracy issue.The surgeon proceeded with surgery and medical intervention was not mentioned.Fluoro was used for the rest of the case.

Manufacturer Narrative

Additional information in sections a4 and b5.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

Event Description

Additional information was received.It was reported that the inaccuracy was less than 3.5mm.

Manufacturer Narrative

H2: see b5.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

Manufacturer Narrative

Update to h6: e012401 regarding the screw that went through the canal.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic will submit a supplemental report if additional relevant information becomes known.

• Brand Name: O-ARM O2 IMAGING SYSTEM
• Type of Device: INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM
• Manufacturer (Section D): SANMINA -SCI SYSTEMS; km 15.5 no. 29, plant 06; carr. chapala-guadalajara,jal 45640 ; MX 45640
• Manufacturer (Section G): SANMINA -SCI SYSTEMS; km 15.5 no. 29, plant 06; carr. chapala-guadalajara,jal 45640 ; MX 45640
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 18579698
• MDR Text Key: 333729881
• Report Number: 3006544299-2024-00052
• Device Sequence Number: 1
• Product Code: OWB
• UDI-Device Identifier: 00763000542849
• UDI-Public: 00763000542849
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K200074
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup,Followup
• Report Date: 04/11/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 01/25/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: BI70002000
• Device Catalogue Number: BI70002000
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 04/01/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 02/08/2022
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1
• Patient Age: 54 YR
• Patient Sex: Female
• Patient Weight: 77 KG