MAUDE Adverse Event Report: MICROVENTION, INC. WEB SLS; INTRASACCULAR FLOW DISRUPTION DEVICE

Model Number W5-5-S-MVI-3

Device Problem Adverse Event Without Identified Device or Use Problem (2993)

Patient Problem Ruptured Aneurysm (4436)

Event Date 01/11/2024

Event Type  Injury  

Event Description

It was reported that the web sl device was used in a patient to treat an unruptured aneurysm in the anterior communicating artery (acom).The patient had very difficult tortuous anatomy.The web was introduce in the via-17 microcatheter in normal fashion and advanced into the aneurysm.Reportedly, the physician did not have great 1:1 when the web was up and web and microcatheter (system) advanced distal upon unsheathing.The system was brought back and the web deployed in the aneurysm.Subsequent angiography run demonstrated contrast extravasation outside aneurysm dome.The decision made to detach the web, which detached without issue.The via catheter was brought back into the aneurysm and 3 coils were deployed alongside the web.Delayed angiography runs showed no further extravasation and the procedure was concluded.Patient extubated post procedure in stable condition and was neurologically intact; and was discharged home.

Manufacturer Narrative

Visual analysis: a visual inspection of the device captured in this file could not be performed as a physical device was not returned for evaluation, nor were any images of the device provided in place of a device return.Procedure and medical imaging was not provided for this investigation.Investigation findings: without the return and physical evaluation of the device, the investigation cannot definitively determine if a condition existed that would have caused or contributed to the reported event.Without imaging, the investigation cannot verify the event occurred as described, nor could the investigation definitively determine the cause of the reported event.Based on a review of the device¿s risk documentation, the reported event did not indicate there were any potential or new manufacturing, design, quality, or other systemic issues, or non-conformances.The complaint code is monitored through the trending process; corrective action is determined, as needed, through this process.Investigations of historic complaint files with similar complaint category coding are recorded in the complaint handling system; without the ability to perform and analysis of the device, this investigation cannot identify with certainty any potential root causes.Batch review: a search for non-conformances associated with this part/lot number combination did not reveal any production-related issues relevant to the complaint that occurred during manufacturing of the device.Complaint system review: there are no similar complaints based on the complaint category regarding this batch number from the last two years recorded in the complaint system at the time of this investigation.Ifu review (additional information can be found in the ifu): potential complications potential complications include but are not limited to the following: vessel puncture site hematoma, aneurysm perforation or rupture, hemorrhage, edema, thromboemboli, transient ischemic attack, ischemic stroke, neurologic deficits, parent artery occlusion, ischemia, vessel dissection or perforation, vascular thrombosis, vasospasm, device migration or misplacement, premature detachment, headache, post-embolization syndrome, infection and death.Warnings: advance and retract the web embolization device slowly.Do not advance the delivery device with excessive force.Determine the cause of any unusual resistance.Remove the web embolization device if excessive friction is noted and check for damage.Do not rotate the delivery device during or after delivery of the web embolization device.Rotating the web embolization device may result in damage or premature detachment.The web embolization device cannot be detached with any other power source other than a web detachment control device.Ensure that at least two web detachment control devices are available before initiating an embolization procedure - instructions for use detachment of the web embolization device 34.The detachment control device is pre-loaded with batteries and will activate when the delivery device is properly connected.35.Verify that the rhv is firmly locked around the delivery device before attaching the detachment control device to ensure that the web embolization device does not move during the connection process.36.Ensure that the delivery device gold connectors are clean and free from blood or contrast.If necessary, wipe the connectors with sterile water and dry before connecting.37.Insert the proximal end of the delivery device into the detachment control device.When the delivery device is properly connected, the light will flash green and an intermittent tone will be heard.38.Verify the web embolization device position before pressing the detachment button.39.Push the detachment button.During firing, the light should be solid green and the beep should be continuous.40.Verify detachment by first loosening the rhv valve, then pulling back slowly on the delivery device and verifying that there is not web embolization device movement.If the web embolization device does not detach, push the detachment button again.If the web embolization device is still not detached, obtain a new detachment control device and attempt detachment up to two additional times.If it does not detach, remove the delivery device.41.Verify the position of the web embolization device angiographically through the guide catheter.42.Prior to removing the microcatheter from the treatment site, place an appropriately sized guidewire completely through the microcatheter lumen to ensure that no part of the web embolization device remains within the microcatheter.Investigation conclusion: the physical device was not available for evaluation to determine if a condition existed that would have caused or contributed to event.Supplemental imaging was also unavailable for review; without imaging, the investigation cannot verify the event occurred as described, nor could the investigation definitively determine the cause of the reported event.This information may be updated if additional information is provided at a later date.

• Brand Name: WEB SLS
• Type of Device: INTRASACCULAR FLOW DISRUPTION DEVICE
• Manufacturer (Section D): MICROVENTION, INC.; 35 enterprise; aliso viejo CA 92656
• Manufacturer Contact: terrence callahan ; 35 enterprise; aliso viejo, CA 92656 ; 7142498000
• MDR Report Key: 18590770
• MDR Text Key: 333900416
• Report Number: 2032493-2024-00083
• Device Sequence Number: 1
• Product Code: OPR
• UDI-Device Identifier: 00842429110874
• UDI-Public: (01)00842429110874(11)210421(17)240331(10)21042113R
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P170032
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,User Facility,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial
• Report Date: 01/26/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 01/26/2024
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Expiration Date: 03/31/2024
• Device Model Number: W5-5-S-MVI-3
• Device Lot Number: 21042113R
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 01/11/2024
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 04/21/2021
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: VIA-17 MICROCATHETER.; WDC-2 DETACHMENT CONTROLLER.
• Patient Outcome(s): Required Intervention