MAUDE Adverse Event Report: DEPUY ORTHOPAEDICS INC US S/C TRIAL HANDLE ANGLED; HIP INSTRUMENTS : HANDLES

Catalog Number 205513000

Device Problems Device-Device Incompatibility (2919); Mechanical Jam (2983)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/25/2024

Event Type  malfunction  

Event Description

It was reported that one of the bearings were stuck and would not allow the trial head to lock in.

Manufacturer Narrative

Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.

Manufacturer Narrative

Product complaint # (b)(4).Investigation summary: it was reported that one of the bearings were stuck and would not allow the trial head to lock in.The device associated with this report was returned to depuy synthes for evaluation.Visual analysis found that the two of the four ball plungers are jammed and does not retract properly.Assembling problems are most probably caused due to this condition.The device presents a normal wear appearance consistent with normal use for a long period of time.The reported allegation can be confirmed.The observed condition was identified as an end of life indicator; damage consistent with repeated use and servicing.The lifecycle requirements of the device are event related and depend on the use and inspection of the device in clinical practice.As the device can be damaged on the first or 100th use, the device must be properly inspected prior to each surgical use.Refer to the device/country specific ifu for information related to end of life, reprocessing instructions, and inspection procedures.The overall complaint was confirmed as the observed condition of the s/c trial handle angled would contribute to the complained device issue.Based on the investigation findings, the potential cause is traced to end of life, and it has been determined that no corrective and/or preventative action is required.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: a device history record (dhr) review or manufacturing records evaluation (mre) was not possible because the date code (pg0206) provided is not a valid finished goods lot#.

Manufacturer Narrative

Product complaint # : (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.

• Brand Name: S/C TRIAL HANDLE ANGLED
• Type of Device: HIP INSTRUMENTS : HANDLES
• Manufacturer (Section D): DEPUY ORTHOPAEDICS INC US; 700 orthopaedic drive; warsaw IN 46581 0988
• Manufacturer (Section G): DEPUY ORTHOPAEDICS, INC. 1818910; 700 orthopaedic dr.; warsaw IN 46581 0988
• Manufacturer Contact: kate karberg ; 700 orthopaedic dr.; warsaw, IN 46581 ; 3035526892
• MDR Report Key: 18606985
• MDR Text Key: 334260642
• Report Number: 1818910-2024-02025
• Device Sequence Number: 1
• Product Code: HWA
• UDI-Device Identifier: 10603295084488
• UDI-Public: 10603295084488
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 01/30/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 01/30/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 205513000
• Device Lot Number: PG0206
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 03/21/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 02/15/2006
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1
• Patient Age: 75 YR
• Patient Sex: Female