MAUDE Adverse Event Report: SYNTHES GMBH FLEX ARM; ORTHOPEDIC MANUAL SURGICAL INSTRUMENT

Catalog Number 03.612.010

Device Problem Compatibility Problem (2960)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/17/2024

Event Type  malfunction  

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: d9: complainant part is not expected to be returned for manufacturer review/investigation.H3, h4, h6: without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Event Description

Device report from synthes reports an event in canada as follows: it was reported that during a spinal procedure on (b)(6) 2024, the flex arm was not sufficiently tightening.Therefore, the surgeon took the other flex arm from the system and continued with his case.There was no delay or patient consequence, and the procedure was completed successfully.This report involves one flex arm.This is report 1 of 1 for (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.The product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that there were no damage or defects with the flex arm only was observed minor wear on the surface of the device which did not cause any functional issues.A dimensional inspection for the flex arm was not performed as it is not applicable to the complaint condition.A functional test was performed to device and the tensioning knob was able to be tightened to create sufficient rigidity of the flex arm.The band clamp knob was able to tighten completely.The complaint condition was not able to be replicated.The overall complaint was not confirmed as the observed condition of the flex arm would not contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.If information is obtained that was not available for this medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: the photo was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned.Visual analysis of the photo revealed that there was no damage or defects with the flex arm.There is not enough evidence in the photo to confirm the allegation.Functionality issues cannot be assessed through a photo investigation.As the device was not returned, an as-received condition could not be assessed, and a dimensional inspection and document/specification review were not completed.The overall complaint was not confirmed as the flex arm was found to have no damage or defects.No definitive root cause could be determined.There was no indication that a design or manufacturing issue contributed to the complaint.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.H4,h6 part: 03.612.010.Synthes lot:h856780.Supplier lot:h856780.Release to warehouse date: apr 14, 2021.Supplier: mediflex surgical products.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: FLEX ARM
• Type of Device: ORTHOPEDIC MANUAL SURGICAL INSTRUMENT
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 18622736
• MDR Text Key: 334734416
• Report Number: 8030965-2024-01771
• Device Sequence Number: 1
• Product Code: LXH
• UDI-Device Identifier: 10705034714486
• UDI-Public: (01)10705034714486
• Combination Product (y/n): N
• Reporter Country Code: CA
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 02/01/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 03.612.010
• Device Lot Number: H856780
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 03/05/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 04/14/2021
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1