|
Model Number EGIA60AVM |
Device Problems
Entrapment of Device (1212); Retraction Problem (1536)
|
Patient Problem
Tissue Breakdown (2681)
|
Event Date 01/17/2024 |
Event Type
malfunction
|
Manufacturer Narrative
|
D10 concomitant product: sigpshell, sig power sigpshell control shell, (lot#: n3l1816y); sigadaptstnd, sig power sigadaptstnd linear adapter, (serial#: (b)(6)); sigphandle, sig power sigphandle handle, (serial#: (b)(6)).Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
|
|
Event Description
|
According to the reporter, during a laparoscopic small bowel transection , the jaws of the device lock on tissue, the user tried extracting tool and it would not retract knife blade.The stuck device was cut off and re-stapled to resolve the issue.
|
|
Manufacturer Narrative
|
D10 concomitant product: sigpshell, sig power sigpshell control shell (lot#n3k2781y); sigpshell, sig power sigpshell control shell (lot#n3k2781y) additional information: g3, h3 evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.Visual inspection noted that the reload was attached to the returned adapter.The jaws were closed.The knife blade was advanced just proximal of the 6cm cut mark.The sled was fully advanced and staple pushers were visible along the entire length of the reload.Functionally, a manual retract tool was used to fully retract the reload.This was not found to be difficult.The reload could then be unloaded by depressing the blue unload button on the adapter and rotating the reload.The reload was loaded into a representative instrument.The interlock was overridden and the reload was cycled without hesitation or binding.Test media was cleanly transected.The reload interlock was tested and found to function properly.It was reported that the instrument locked on tissue.The reported issue was confirmed.The most likely cause was not traced to the device.It was also reported that the knife blade was difficult to retract.The reported issue could not be confirmed.The most likely cause could not be established from the information available.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
|
|
Search Alerts/Recalls
|
|
|