Catalog Number 1011921-100 |
Device Problems
Difficult to Remove (1528); Material Deformation (2976); Activation Failure (3270)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 01/16/2024 |
Event Type
Injury
|
Manufacturer Narrative
|
Manufacturer's investigation is still pending at this time.Results and conclusions will be provided in the final report.The additional unk absolute pro device referenced in b5 is filed under separate medwatch report number.
|
|
Event Description
|
It was reported that the procedure was performed to treat a heavily calcified target lesion in the superficial femoral artery (sfa), with intended stenting locations in the distal, mid and proximal sfa.The patient anatomy included high grade stenosis in the ipsilateral sfa due to a sclerosed unspecified vascular plug in the distal sfa.On the contralateral side, there was vascular calcification in the pelvic inlet without limitation of wire probing.A 6 french crossover sheath was used and the first absolute pro self expanding stent system (sess) was advanced to the distal sfa.Deployment was initiated; however, the stent only partially deployed, although there was no reported issue with the thumbwheel, and was caught on the vascular plug.During removal of the delivery system, the stent fully deployed, as it remained caught on the vascular plug.The stent was deemed not possible to retrieve and remains in the patient anatomy.The second absolute pro sess was advanced to the target lesion and deployment was initiated; however, during deployment, difficulty was noted with the final release and a complete loss of mesh structure occurred.The stent fissured [break] and stretched three times its length.The stent migrated and became embedded in the pelvic circulation, completely outside the target lesion.The stent was unable to be retrieved and occluded the vessel.Balloon angioplasty was performed as treatment of the occlusion.A third absolute pro sess was advanced to the target lesion; however, the stent could not be deployed, although there was no reported issue with the thumbwheel.There was no adverse patient sequela.No additional information was provided.
|
|
Event Description
|
Subsequent to the initial report, additional information was received.It was reported that an attempt was made to retrieve the first absolute pro stent.The second absolute pro stent caught on the unspecified vascular plug, causing a complete loss of mess structure to occur.The third absolute pro stent was deployed after it initially failed to deploy.No additional information was provided.
|
|
Manufacturer Narrative
|
Manufacturer's investigation is still pending at this time.Results and conclusions will be provided in the final report.
|
|
Manufacturer Narrative
|
Correction h6- medical device problem code 2976 was removed.The device was not returned for analysis.Electronic lot history record (elhr) and exception reviews were performed and revealed no indication of a product quality issue.Additionally, a query of the complaint handling database for the reported lot revealed there is no indication of a lot level product quality issue.As there was no damage noted to the device during the inspection prior to use, it is possible that the distal shaft was bent in the heavily calcified anatomy resulting in preventing the shaft lumens from moving freely; thus resulting in the reported activation/deployment difficulties; however this cannot be confirmed.The investigation determined a conclusive cause for the reported activation/deployment difficulties cannot be determined.During removal of the delivery system interaction with the vascular plug resulted in the stent to fully deploy however resulted in the stent to heavily stretch.As reported, the heavily stretched stent was retrieved with a retrieval catheter.Based on the reported information and results of the complaint investigation there is no indication of a product quality issue with respect to the design, manufacture, or labeling of the device.
|
|
Event Description
|
Subsequent to the follow-up mdr report, additional information was received.The second 6.0 x 100mm absolute pro stent caught on the unspecified vascular plug, causing a complete loss of mesh structure to occur.The third absolute pro stent was deployed at the target lesion with no issues.No additional information was provided.
|
|
Search Alerts/Recalls
|